HD-TXC-4KZ-101

The HD‑RXC‑4KZ‑101 is a DM® Essentials 4K60 4:4:4 receiver designed to interoperate with a DM® Essentials transmitter or DMPS Essentials switcher for the transmission of HDMI®, RS-232, and IR signals. A CAT5e or higher twisted pair cable (Crestron DM‑CBL‑8G or DM‑CBL‑ULTRA sold separately) is needed to connect the HD‑RXC‑4KZ‑101 to the DM Essentials transmitter or DMPS Essentials switcher. For 1080p, WUXGA, and 2K signals, a cable length of up to 230 ft (70 m) is supported. For UHD and 4K signals, a cable length of up to 130 ft (40 m) is supported.1   Interoperability with a DM Essentials Transmitter or DMPS Essentials Switcher The DM Essentials input port of the HD‑RXC‑4KZ‑101 must be connected to a DM Essentials output port of a DM Essentials transmitter or DMPS Essentials switcher. Examples of supported DM Essentials 4K60 4:4:4 transmitters are the HD‑TXC‑4KZ‑101 and HD‑TXCA‑4KZ‑101. Supported DMPS Essentials switchers are the HD‑PS622, HD‑PS621, HD‑PS402, and HD‑PS401.   The HD‑RXC‑4KZ‑101 can be configured and controlled only when it is used with a DMPS Essentials switcher. The web interface of the switcher can be used to configure the HD‑RXC‑4KZ‑101. In addition, control system programming and .AV Framework™ software support of the HD‑RXC‑4KZ‑101 is hosted by the switcher.   4K60 4:4:4 and HDR Support The HD‑RXC‑4KZ‑101 supports video resolutions up to 4K60 with 4:4:4 color sampling. HDR10, HDR10+, and Dolby Vision® video formats are also supported.2   Compact, Surface-Mountable Design Compact in design, the HD‑RXC‑4KZ‑101 can be mounted onto a flat surface such a wall behind a flat-panel display or a ceiling above a projector. It can also be attached to a single rack rail in the back of an equipment cabinet. The HD‑RXC‑4KZ‑101 can receive power from the included power pack or from the remote DM Essentials transmitter or DMPS Essentials switcher.3     Key Features Interoperability with a DM® Essentials transmitter or DMPS Essentials switcher Point-to-point extension of HDMI®, RS-232, and IR signals over a CAT5e or higher cable DM Essentials transmission distance up to 130 ft (40 m) for UHD and 4K signals or up to 230 ft (70 m) for 1080p, WUXGA, and 2K signals 4K60 4:4:4 capability HDR10, HDR10+, and Dolby Vision® video formats Compliance with HDCP 2.3 CEC (Consumer Electronics Control) pass-through capability Bidirectional RS-232 and IR pass-through capability EDID pass-through capability Compact, surface-mountable design Power from 24VDC power pack (included) or from remote DM Essentials transmitter or DMPS Essentials switcher

HD-RXU-4KZ-101-EDM® Essentials 4K60 4:4:4 Receiver for HDMI®, USB 2.0, and Ethernet Signal Extension over CATx CableInteroperability with a DM® Essentials HD-TXU-4KZ Series transmitter to provide point-to-point extension of HDMI®, USB 2.0, and Ethernet signals over a CATx cable. Supports 4K60 4:4:4 video, HDR10+, and HDCP 2.3. The HD‑RXU‑4KZ‑101‑E is a DM® Essentials 4K60 4:4:4  receiver designed to interoperate with a DM Essentials HD‑TXU‑4KZ Series transmitter for the extension of HDMI® and USB 2.0 signals. This is useful in applications where an AV source is located remotely from its destination, such as a display, projector, or codec solution. A CAT5e or higher twisted pair cable (Crestron DM‑CBL‑8G or DM‑CBL‑ULTRA sold separately) must be used to connect the HD‑RXU‑4KZ‑101‑E to the DM Essentials transmitter.1Interoperability with a DM Essentials HD-TXU-4KZ Series TransmitterFor interoperability between the HD‑RXU‑4KZ‑101‑E and an HD‑TXU‑4KZ Series transmitter, the DM Essentials input port of the HD‑RXU‑4KZ‑101‑E must be connected to the DM Essentials output port of the HD‑TXU‑4KZ Series transmitter.NOTE: USB 2.0 data extension is not supported if the HD-RXU-4KZ-101-E is paired with a DM Essentials transmitter other than an HD-TXU-4KZ Series transmitter or paired with a DMPS Essentials HD-PS Series switcher.4K60 4:4:4 and HDR SupportThe HD-RXU-4KZ-101-E supports video resolutions up to 4K60 with 4:4:4 color sampling. HDR10, HDR10+, and Dolby Vision® video formats are also supported.2USB 2.0 Data ExtensionTwo USB 2.0 host ports are provided on the HD-RXU-4KZ-101-E, enabling connection to a wide variety of supported USB 2.0 peripheral devices.3Ethernet Pass-Through CapabilityThe HD‑RXU‑4KZ‑101-E is equipped with a 100/1000 Mbps LAN port that receives an Ethernet signal transmitted over the DM Essentials connection from the transmitting endpoint. The LAN port of one endpoint can be connected to an Ethernet network, while the LAN port of the other endpoint can be connected directly to an Ethernet-enabled device such as a PC.Compact, Surface-Mountable DesignCompact in design, the HD-RXU-4KZ-101-E can be mounted onto a flat surface such as a wall behind a flat-panel display or a ceiling above a projector. It can also be attached to a single rack rail in the back of an equipment cabinet. The HD-RXU-4KZ-101-E can receive power from the included power pack or from the remote DM Essentials transmitter.4 Key FeaturesDM® Essentials receiver functionality designed to interoperate with a DM Essentials HD-TXU-4KZ Series transmitterPoint-to-point extension of an HDMI® AV signal, USB 2.0 data signals, and Ethernet signal over a CAT5e or higher cableDM Essentials transmission distance up to 130 ft (40 m) for UHD and 4K signals or up to 230 ft (70 m) for 1080p, WUXGA, and 2K signals4K60 4:4:4 capabilityHDR10, HDR10+, and Dolby Vision® video formatsEthernet pass-through capabilityCompliance with HDCP 2.3CEC (Consumer Electronics Control) pass-through capabilityEDID pass-through capabilityCompact, surface-mountable designPower from 24VDC power pack (included) or from remote DM Essentials transmitter VideoInput Signal TypeDM® Essentials with HDR10, HDR10+, Dolby Vision®, Deep Color, and 4K60 4:4:4 support2Output Signal TypeHDMI® with HDR10, HDR10+, Dolby Vision, Deep Color, and 4K60 4:4:4 support2Copy ProtectionHDCP 2.3ResolutionsCommon resolutions are listed in the following table.Scan TypeResolutionFrame RateColor SamplingColor DepthProgressive4096x2160 DCI 4K & 3840x2160 4K UHD24 Hz4:4:412 bit30 Hz4:4:412 bit60 Hz4:2:212 bit60 Hz4:4:48 bit2560x1600 WQXGA60 Hz4:4:48 bit1920x1080 FHD 1080p60 Hz4:4:412 bitInterlaced1920x1080 HD 1080i30 Hz4:4:412 bitNote: The maximum supported resolution is 4K60 with 4:4:4 color sampling. Custom resolutions are supported at pixel clock rates up to 600 MHz.AudioInput Signal TypeDM EssentialsOutput Signal TypeHDMIDigital FormatsDolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS ES, DTS 96/24, DTS HD® High Res, DTS-HD Master Audio, DTS:X®, LPCM up to 8 channelsCommunicationsHDMIHDCP 2.3, EDID, CEC pass-throughDM EssentialsHDCP 2.3, EDID pass-through;USB 2.0 up to 300 MbpsUSBUSB signal extension via USB 2.0 host ports;USB host for one TT-100 series cable caddy (sold separately) via SERVICE portEthernet100/1000 Mbps pass-throughConnectorsHDMI OUTPUT(1) HDMI Type A connector, female;HDMI digital video/audio output;DVI compatible5DM IN(1) 8‑pin RJ‑45 yellow connector, female, shielded;DM Essentials input port for connection to the DM Essentials output port of a DM Essentials transmitter1LAN(1) 8-pin RJ‑45 connector, female;100BASE-TX/1000BASE-T Ethernet port;Receives Ethernet signal from an HD-TX-4KZ-111-E transmitter over the DM Essentials connection24V 1.4A(1) 2.1 x 5.5 mm DC power connector;24VDC power input;PW-2420RU power pack included4HOST(2) USB Type-A connectors, female;USB 2.0 host ports;USB signal extender ports for connection to USB mice, keyboards, or other USB 2.0 peripheral devices;3Available Power: 500 mA @ 5VDC per portSERVICE(1) USB 2.0 Type‑A connector, female;Used for firmware loading, configuration management, or as a USB host port for one TT-100 series cable caddy (sold separately);Can also provide up to 5V 500 mA power to a USB powered deviceGround(1) Chassis ground lugControls and IndicatorsPWR(1) LED, indicates that power is being applied to the device. Amber indicates that the device is booting. Green indicates that the device is operational.OUTPUT(1) Green LED, indicates that the device is transmitting an HDMI signalDM IN(2) LEDs on RJ 45 connector.Green indicates that a DM Essentials link is established.Flashing amber indicates non-HDCP video, and solid amber indicates HDCP video.LAN(2) LEDs on RJ‑45 connector.Green indicates that a 100 Mbps link is established.Solid amber indicates that a 1000 Mbps link is established.Flashing amber indicates 1000 Mbps Ethernet activity.PowerPower Pack (Included)Input: 100-240VACOutput: 24VDC 2.5AModel: PW-2420RU4EnvironmentalTemperature32° to 104°F (0° to 40°C)Humidity20% to 90% RH (non-condensing)EnclosureChassisMetal, black finish, vented top and sides, 2 mounting brackets includedMountingFreestanding, surface mountable, or attachment to a single rack railDimensionsHeight1.20 in. (30 mm)Width4.19 in. (106 mm)Depth7.94 in. (202 mm)Weight1.19 lb (0.54 kg)

HD-TXU-4KZ-111-EDM® Essentials 4K60 4:4:4 Transmitter for USB‑C® DisplayPort™, USB 2.0, and Ethernet Signal Extension over CATx CableInteroperability with a DM® Essentials HD-RXU-4KZ Series receiver to provide point-to-point extension of USB-C® DisplayPort™, USB 2.0, and Ethernet signals over a CATx cable. Supports 4K60 4:4:4 video, HDR10+, and HDCP 2.3. The HD‑TXU‑4KZ‑111‑E is a DM® Essentials 4K60 4:4:4 transmitter designed to interoperate with a DM Essentials HD‑RXU‑4KZ Series receiver. A USB-C® input with DisplayPort™ Alt Mode capability enables signal extension of a DisplayPort AV signal along with USB 2.0 data. This is useful in applications where an AV source is located remotely from its destination, such as a display, projector, or codec solution. A CAT5e or higher twisted pair cable must be used to connect the HD-TXU-4KZ-111-E to the DM Essentials receiver.1Interoperability with a DM Lite HD-RXU-4KZ Series ReceiverFor interoperability between the HD-TXU-4KZ-111-E and an HD-RXU-4KZ Series receiver, the DM Essentials output port of the HD‑TXU‑4KZ‑111‑E must be connected to the DM Essentials input port of the HD-RXU-4KZ Series receiver.NOTE: USB 2.0 data extension is not supported if the HD-TXU-4KZ-111-E is paired with a DM Essentials receiver other than an HD-RXU-4KZ Series receiver or paired with a DMPS Essentials switcher (HD-PS Series or HD‑RX‑4K‑210‑C‑E[‑POE]).4K60 4:4:4 and HDR SupportThe HD‑TXU‑4KZ‑111‑E supports video resolutions up to 4K60 with 4:4:4 color sampling. HDR10, HDR10+, and Dolby Vision® video formats are also supported.2USB 2.0 Data ExtensionTwo USB 2.0 host ports are provided on the HD‑TXU‑4KZ‑111-E, enabling connection to a wide variety of supported USB 2.0 peripheral devices.3Ethernet Pass-Through CapabilityThe HD-TXU-4KZ-111-E is equipped with a 100/1000 Mbps LAN port that passes an Ethernet signal over the DM Lite connection to the receiving endpoint. The LAN port of one endpoint in the pair can be connected to an Ethernet network while the LAN port of the other endpoint can be connected directly to an Ethernet-enabled device such as a PC.Compact, Surface‑Mountable DesignCompact in design, the HD‑TXU‑4KZ‑111‑E can be mounted onto a flat surface such as the underside of a table, behind a credenza, or inside a podium. It can also be attached to a single rack rail in the back of an equipment cabinet. The HD‑TXU‑4KZ‑111‑E can receive power from the included power pack or from the remote DM Essentials receiver.4 Key FeaturesDM® Essentials transmitter functionality designed to interoperate with a DM Essentials HD-RXU-4KZ Series receiverPoint-to-point extension of a USB-C® DisplayPort™ AV signal, USB 2.0 data signals, and Ethernet signal over a CAT5e or higher cableUSB-C® input with DisplayPort™ Alt Mode capability and USB 2.0 supportDM Essentials transmission distance up to 130 ft (40 m) for UHD and 4K signals or up to 230 ft (70 m) for 1080p, WUXGA, and 2K signals4K60 4:4:4 capabilityHDR10, HDR10+, and Dolby Vision® video formatsEthernet pass-through capabilityCompliance with HDCP 2.3CEC (Consumer Electronics Control) pass-through capabilityEDID pass-through capabilityCompact, surface-mountable designPower from 24VDC power pack (included) or from remote DM Essentials receiver VideoInput Signal TypeDisplayPort™ over USB-C® (DisplayPort Alt Mode) with HDR10, HDR10+, Dolby Vision®, Deep Color, and 4K60 4:4:4 support2Output Signal TypeDM® Essentials with HDR10, HDR10+, Dolby Vision, Deep Color, and 4K60 4:4:4 support2Copy ProtectionHDCP 2.3ResolutionsCommon resolutions are listed in the following table.Scan TypeResolutionFrame RateColor SamplingColor DepthProgressive4096x2160 DCI 4K & 3840x2160 4K UHD24 Hz4:4:412 bit30 Hz4:4:412 bit60 Hz4:2:212 bit60 Hz4:4:48 bit2560x1600 WQXGA60 Hz4:4:48 bit1920x1080 FHD 1080p60 Hz4:4:412 bitNotes: The maximum supported resolution is 4K60 with 4:4:4 color sampling. Custom resolutions are supported at pixel clock rates up to 600 MHz.The HD-TX-4KZ-111-E does not support interlaced video.AudioInput Signal TypeDisplayPort over USB-C (DisplayPort Alt Mode)Output Signal TypeDM EssentialsDigital FormatsDolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS ES, DTS 96/24, DTS HD® High Res, DTS-HD Master Audio, DTS:X®, LPCM up to 8 channelsCommunicationsUSB‑CHDCP 2.3, EDID, CEC pass-through;USB 2.0 up to 300 MbpsUSBUSB signal extension via USB 2.0 host ports;USB host for one TT-100 series cable caddy (sold separately) via SERVICE portDM EssentialsHDCP 2.3, EDID pass-through;USB 2.0 up to 300 MbpsEthernet100/1000 Mbps pass-throughConnectorsUSB INPUT(1) USB Type‑C® connector, female;Digital video/audio input using DisplayPort Alt Mode;5USB 2.0 data supportDM OUT(1) 8‑pin RJ‑45 yellow connector, female, shielded;DM Essentials output port for connection to a DM Essentials receiver1LAN(1) 8-pin RJ‑45 connector, female;100BASE-TX/1000BASE-T Ethernet port;Passes Ethernet signal over the DM Essentials connection to an HD-RXU-4KZ-101-E receiver24V 1.4A(1) 2.1 x 5.5 mm DC power connector;24VDC power input;PW-2420RU power pack included4HOST(2) USB Type-A connectors, female;USB 2.0 host ports;USB signal extender ports for connection to USB mice, keyboards, or other USB 2.0 peripheral devices;3Available Power: 500 mA @ 5VDC per portSERVICE(1) USB 2.0 Type-A connector, female;Used for firmware loading, configuration management, or as a USB host port for one TT-100 series cable caddy (sold separately);Can also provide up to 5V 500 mA power to a USB powered deviceGround(1) Chassis ground lugControls and IndicatorsPWR(1) LED, indicates that power is being applied to the device. Amber indicates that the device is booting. Green indicates that the device is operational.INPUT(1) Green LED, indicates that the device is receiving a DisplayPort over USB‑C (DisplayPort Alt Mode) input signalDM OUT(2) LEDs on RJ‑45 connector.Green indicates that a DM Essentials link is established.Flashing amber indicates non‑HDCP video, and solid amber indicates HDCP videoLAN(2) LEDs on RJ-45 connector.Green indicates that a 100 Mbps link is established.Solid amber indicates that a 1000 Mbps link is established.Flashing amber indicates 1000 Mbps Ethernet activity.PowerPower Pack (Included)Input: 100-240VACOutput: 24VDC 2.5AModel: PW-2420RU4EnvironmentalTemperature32° to 104°F (0° to 40°C)Humidity20% to 90% RH (non-condensing)EnclosureChassisMetal, black finish, vented top and sides, 2 mounting brackets includedMountingFreestanding, surface mountable, or attachment to a single rack railDimensionsHeight1.20 in. (30 mm)Width4.19 in. (106 mm)Depth7.94 in. (202 mm)Weight1.2 lb (0.55 kg)ComplianceRegulatory Model: M202047005Intertek® Listed for US and Canada, CE, IC, FCC Part 15 Class B digital deviceMaximum DM Essentials Transmission Distance    Cable Type1ResolutionFrame Rate (Hz)Color SamplingColor DepthDM-CBL-ULTRA DM® Ultra CableDM-CBL-8G DM 8G® Cable or CAT5e (UTP) or Higher 1920x1080 FHD 1080p604:4:48, 12 bit230 ft (70 m)195 ft (60 m)1600x1200 UXGA604:4:48, 12 bit2048x1080 DCI 2K604:4:48, 12 bit1920x1200 WUXGA604:4:48, 12 bit2048x1152 QWXGA604:4:48, 12 bit2560x1080 UWFHD604:4:48 bit2560x1440 WQHD Reduced Blanking604:4:48 bit2560x1600 WQXGA Reduced Blanking604:4:48 bit2048x1152 QWXGA604:4:412 bit3840x2160 4K UHD and 4096x2160 DCI 4K304:2:212 bit304:4:48 bit604:2:08 bit3840x2160 4K UHD and 4096x2160 DCI 4K304:4:412 bit130 ft (40 m)100 ft (30 m)604:2:012 bit604:2:212 bit604:4:48 bit

The HD‑RXCA‑4KZ‑101 is a DM® Essentials 4K60 4:4:4 receiver designed to interoperate with a DM® Essentials transmitter or DMPS Essentials switcher for the transmission of HDMI®, RS-232, IR, and analog audio signals. A CAT5e or higher twisted pair cable (Crestron DM‑CBL‑8G or DM‑CBL‑ULTRA sold separately) is needed to connect the HD‑RXCA‑4KZ‑101 to the DM Essentials transmitter or DMPS Essentials switcher. For 1080p, WUXGA, and 2K signals, a cable length of up to 230 ft (70 m) is supported. For UHD and 4K signals, a cable length of up to 130 ft (40 m) is supported.1Interoperability with a DM Essentials Transmitter or DMPS Essentials SwitcherThe DM Essentials input port of the HD‑RXCA‑4KZ‑101 must be connected to a DM Essentials output port of a DM Essentials transmitter or DMPS Essentials switcher. Examples of supported DM Essentials 4K60 4:4:4 transmitters are the HD‑TXC‑4KZ‑101 and HD‑TXCA‑4KZ‑101. Supported DMPS Essentials switchers are the HD‑PS622, HD‑PS621, HD‑PS402, and HD‑PS401.The HD‑RXCA‑4KZ‑101 can be configured and controlled only when it is used with a DMPS Essentials switcher. The web interface of the switcher can be used to configure the HD‑RXCA‑4KZ‑101. In addition, control system programming and .AV Framework™ software support of the HD‑RXCA‑4KZ‑101 is hosted by the switcher.4K60 4:4:4 and HDR SupportThe HD‑RXCA‑4KZ‑101 supports video resolutions up to 4K60 with 4:4:4 color sampling. HDR10, HDR10+, and Dolby Vision® video formats are also supported.2Analog Audio De-EmbeddingThe analog audio output port of the HD‑RXCA‑4KZ‑101 enables 2 channel LPCM audio to be extracted from the AV signal.S/PDIF Optical Digital Audio ReturnThe S/PDIF optical digital audio input of the HD‑RXCA‑4KZ‑101 receives S/PDIF optical digital audio from a device (for example, a display). The S/PDIF optical digital audio output of the HD-TXCA-4KZ-101 then transmits the audio to an AV receiver. Supported S/PDIF digital audio formats are Dolby Digital®, Dolby Digital EX, DTS®, DTS ES, and LPCM up to 6 channels.Compact, Surface-Mountable DesignCompact in design, the HD‑RXCA‑4KZ‑101 can be mounted onto a flat surface such as a wall behind a flat-panel display or the ceiling above a projector. It can also be attached to a single rack rail in the back of an equipment cabinet. The HD‑RXCA‑4KZ‑101 can receive power from the included power pack or from the remote DM Essentials transmitter or DMPS Essentials switcher.3 Key FeaturesInteroperability with a DM® Essentials transmitter or DMPS Essentials switcherPoint-to-point extension of HDMI®, RS-232, IR, and analog audio signals over a CAT5e or higher cableDM Essentials transmission distance up to 130 ft (40 m) for UHD and 4K signals or up to 230 ft (70 m) for 1080p, WUXGA, and 2K signals4K60 4:4:4 capabilityHDR10, HDR10+, and Dolby Vision® video formatsCompliance with HDCP 2.3Analog audio de-embeddingS/PDIF optical digital audio input for audio return to the HD‑TXCA‑4KZ‑101CEC (Consumer Electronics Control) pass-through capabilityBidirectional RS-232 and IR pass-through capabilityEDID pass-through capabilityCompact, surface-mountable designPower from 24VDC power pack (included) or from remote DM Essentials transmitter or DMPS Essentials switcher

The HD‑TXCA‑4KZ‑101 is a DM® Essentials 4K60 4:4:4 transmitter designed to interoperate with a DM® Essentials receiver or DMPS Essentials switcher for the transmission of HDMI®, RS-232, IR, and analog audio signals. A CAT5e or higher twisted pair cable (Crestron DM‑CBL‑8G or DM‑CBL‑ULTRA sold separately) is needed to connect the HD‑TXCA‑4KZ‑101 to the DM Essentials receiver or DMPS Essentials switcher. For 1080p, WUXGA, and 2K signals, a cable length of up to 230 ft (70 m) is supported. For UHD and 4K signals, a cable length of up to 130 ft (40 m) is supported.1Interoperability with a DM Essentials Receiver or DMPS Essentials SwitcherThe DM Essentials output port of the HD‑TXCA‑4KZ‑101 must be connected to a DM Essentials input port of a DM Essentials receiver or DMPS Essentials switcher. Examples of supported DM Essentials 4K60 4:4:4 receivers are the HD‑RXC‑4KZ‑101 and HD‑RXCA‑4KZ‑101. Supported DMPS Essentials switchers are the HD‑PS622, HD‑PS621, HD‑PS402, HD‑PS401, and HD‑RX‑4K‑210‑C‑E.Note: When paired with an HD-RX-4K-210-C-E(-POE), the transmitter cannot provide power to the receiver. Power must be connected to the HD-RX-4K-210-C-E(-POE) only.The HD‑TXCA‑4KZ‑101 can be configured and controlled only when it is used with a DMPS Essentials switcher. The web interface of the switcher can be used to configure the HD‑TXCA‑4KZ‑101. In addition, control system programming and .AV Framework™ software support of the HD‑TXCA‑4KZ‑101 is hosted by the switcher.4K60 4:4:4 and HDR SupportThe HD‑TXCA‑4KZ‑101 supports video resolutions up to 4K60 with 4:4:4 color sampling. HDR10, HDR10+, and Dolby Vision® video formats are also supported.2Analog Audio EmbeddingThe analog audio input port of the HD‑TXCA‑4KZ‑101 enables a balanced/unbalanced stereo audio source to be embedded with the video signal from the HDMI input. An audio selection push button is provided to switch between analog and HDMI audio inputs as desired. The audio selection push button is functional only when the HD‑TXCA‑4KZ‑101 is used with a DM Essentials 4K60 4:4:4 receiver or a DMPS Essentials HD-PS Series switcher.S/PDIF Optical Digital Audio ReturnThe HD‑TXCA‑4KZ‑101 receives S/PDIF optical digital audio from a device (for example, a display) connected to the S/PDIF optical digital audio input of the HD‑RXCA‑4KZ‑101. The S/PDIF optical digital audio output of the HD‑TXCA‑4KZ‑101 then transmits the audio to an AV receiver. Supported S/PDIF digital audio formats are Dolby Digital®, Dolby Digital EX, DTS®, DTS ES, and LPCM up to 6 channels.Compact, Surface‑Mountable DesignCompact in design, the HD‑TXCA‑4KZ‑101 can be mounted onto a flat surface such as the underside of a table, behind a credenza, or inside a podium. It can also be attached to a single rack rail in the back of an equipment cabinet. The HD‑TXCA‑4KZ‑101 can receive power from the included power pack or from the remote DM Essentials receiver or DMPS Essentials switcher.3 Key FeaturesInteroperability with a DM® Essentials receiver or DMPS Essentials switcherPoint-to-point extension of HDMI®, RS-232, IR, and analog audio signals over a CAT5e or higher cableDM Essentials transmission distance up to 130 ft (40 m) for UHD and 4K signals or up to 230 ft (70 m) for 1080p, WUXGA, and 2K signals4K60 4:4:4 capabilityHDR10, HDR10+, and Dolby Vision® video formatsCompliance with HDCP 2.3Analog audio embeddingS/PDIF optical digital audio output for audio return from the HD‑RXCA‑4KZ‑101CEC (Consumer Electronics Control) pass-through capabilityBidirectional RS‑232 and IR pass-through capabilityEDID pass-through capabilityCompact, surface-mountable designPower from 24VDC power pack (included) or from remote DM Essentials receiver or DMPS Essentials switcher

The HD-TX-201-C-2G-E (-B-T or -W-T) is a DM Lite® wall plate transmitter designed to pair with a DM Lite or DMPS Lite™ receiver to form a signal extender for HDMI® signals. The DM Lite family of products offers a versatile solution for extending HD, UHD, 2K, and 4K video signals, with stereo or surround sound audio, over a single CAT5e (or higher) cable. A cable length of up to 230 ft (70 m) is supported for HD 1080p, WUXGA, and 2K signals, or up to 130 ft (40 m) for UHD and 4K.1   In addition to its HDMI input, the HD-TX-201-C-2G-E also includes a VGA input accompanied by a stereo analog audio input. Auto-switching between HDMI and VGA enables plug-and-play simplicity. Manual input selection is also available using the front panel INPUT SEL button. The VGA input can accept RGB and component video signals by using an appropriate breakout cable or adapter (not included). The audio input is selected in tandem with the VGA input, and can be used by itself with no video source connected. However, it cannot be paired with the HDMI video input.   NOTE: When paired with an HD-RX-201-C-E or DMPS Lite receiver, the local inputs are switched in combination with the HDMI input on the receiver, and can also be controlled remotely through integration with a Crestron® control system.   A CAT6a RJ-45 courtesy jack is included to provide a 1000BASE-T network connection for computers and other devices. The front panel jack passes through to a parallel jack on the rear, which connects to an available port on the customer’s LAN. This LAN jack is provided as a convenience to replace the need for a separate RJ-45 wall jack. It does not interface with the DM Lite system and cannot be used to extend Ethernet signals or interface with a control system.   The HD-TX-201-C-2G-E series is available in black or white, and is designed to mount into a 2-gang electrical box or plaster ring (not included). When paired with a surface-mountable receiver, the HD-TX-201-C-2G-E is powered by the receiver over the DM Lite link cable.2   Note: This product is not addressable from a control system and offers no programmable functionality except when paired with an HD-RX-201-C-E or DMPS Lite receiver. Otherwise, AV and CEC signals are simply passed through between the transmitter and receiver. The RJ-45 link port on this product is exclusively intended for linking with a single DM Lite or DMPS Lite receiver. It should not be used to connect to any other equipment or network. DM Lite technology is not compatible with PoE, PoDM, DigitalMedia 8G+®, or HDBaseT® technology.     Key Features Pairs with a DM Lite® or DMPS Lite™ receiver Enables extension of HDMI® video and audio signals Converts and extends VGA and analog audio signals Auto-switches between one HDMI input and one VGA input Links to the receiver via a single CAT5e (or higher) twisted pair cable Supports 4K and UHD at up to 130 ft (40 m) Supports HD 1080p, WUXGA, and 2K at up to 230 ft (70 m) Handles 4K video resolutions up to 4K60 4:2:0 and 4K30 4:4:4 Handles 3D video and Deep Color Supports Dolby® TrueHD, Dolby Atmos®, DTS HD®, DTS:X®, and uncompressed 7.1 linear PCM audio Compatible with HDMI, DVI, and Dual-Mode DisplayPort™ sources Compatible with VGA, RGBHV, RGBS, RGsB, and YPbPr component sources up to HD 1080p and WUXGA HDCP 1.4 compliant Passes CEC and EDID signals Allows control system integration when paired with an HD-RX-201-C-E or DMPS Lite receiver Courtesy LAN jack Flush wall mount design Installs in a 2-gang U.S. electrical box (2-1/4” deep) or plaster ring (not included) Decorator style faceplates sold separately (type FP-G2-DM only) Normally powered by the receiver (surface-mountable) over the link cable