Gateway and interfaces

The C2N-IO is a very compact device that adds control ports to any Crestron 2-Series 3-Series®, or 4-Series® control system. It connects via the Cresnet® control network and provides one RS-232, one IR, and two relay control ports.1 It can be mounted to any flat surface using two screws or adhesive reclosable fastener (3M® Dual Lock® included). Key FeaturesFits within a 2-gang wall boxProvides 1 RS-232, 1 IR/serial, and 2 relay ports1Compatible with any Crestron 2-Series, 3-Series®, or 4-Series® control systemInterfaces via the Cresnet® control bus24 VDC Cresnet poweredSurface mount bracket included

The Crestron® CEN-IO-COM-102 is a compact and cost-effective wired I/O module designed to easily expand the available RS-232 ports within a commercial or residential system. A small form factor allows the CEN-IO-COM-102 to be placed just about anywhere, with the option to attach it to a flat surface or DIN rail using the included mounting bracket. The two onboard, bidirectional RS-232 COM ports enable direct integration with all kinds of third-party equipment.The CEN-IO-COM-102 communicates to the local network using the available LAN connection, allowing the connected equipment to be remotely controlled and monitored from a computer or tablet. Power is conveniently supplied to the CEN-IO-COM-102 via PoE (Power over Ethernet) or a Crestron control system, eliminating the need for a local power supply or extra wiring.Security Protocols:The CEN-IO-COM-102 supports the following security protocols to help protect against service interruptions and malicious intrusions:TLS 1.2 for web server and control system connectionsLocal Authentication for console, web server, and control system connectionsSSL for console connectionsPower over EthernetUsing PoE technology, the CEN-IO-COM-102 gets its operating power directly through the LAN wiring. PoE eliminates the need for a local power supply or any dedicated power wiring. A PoE injector (PWE-4803RU) simply connects in line with the LAN cable at any convenient location. Crestron PoE switches (CEN-SW-POE-5 or CEN-SWPOE-16) may also be used to provide a total networking solution with built-in PoE. All PoE injectors and switches are sold separately.Integrator Friendly EnclosureThe CEN-IO-COM-102 features the Crestron IFE form factor, a compact "Integrator Friendly Enclosure" design that fits almost anywhere and enables a variety of installation options. Its shape allows multiple CEN-IO and other IFE compliant devices to be stacked together. Using the included mounting bracket, it can be fastened to any flat surface or snapped onto a standard DIN rail. Rack mount and pole mount kits are also available.[1] Key FeaturesCompact, cost-effective wired Ethernet I/O moduleProvides two bidirectional RS-232 COM ports with hardware and software handshakingInstaller setup via Crestron Toolbox™ software or web browserSupports TLS 1.2, Local Authentication, and SSL security protocolsPoE (Power over Ethernet) network poweredCompact, stackable "IFE micro" form factorSurface or DIN rail mountableAvailable rack mount and pole mount options[1]

The Crestron® CEN‑IO‑COM‑202 is a compact and cost‑effective wireless I/O extender designed to easily expand the available RS‑232 ports within a commercial or residential system. A small form factor allows the CEN‑IO‑COM‑202 to be placed just about anywhere, with the option to attach it to a flat surface or DIN rail using the included mounting bracket. The two onboard, bidirectional RS‑232 COM ports enable direct integration with all kinds of third-party equipment.The CEN‑IO‑COM‑202 communicates to the local network over Wi‑Fi® wireless communications, allowing the connected equipment to be remotely controlled and monitored from a computer or tablet. Power is conveniently supplied to the CEN‑IO‑COM‑202 via an included 5 VDC power pack.Security ProtocolsThe CEN‑IO‑COM‑202 supports the following security protocols to help protect against service interruptions and malicious intrusions:TLS 1.2 for control system connectionsLocal Authentication for console and control system connectionsAdvanced Wi-Fi Wireless PerformanceCrestron enhanced Wi‑Fi performance is optimized to deliver fast, dependable wireless communications with a 50 ft (15 m) omnidirectional range (conditions permitting). The choice of 802.11 a, b, g, and n protocols affords reliable, high‑speed wireless connectivity in most RF environments. Up to five wireless access points can be memorized for easy connectivity within larger networks.Integrator Friendly EnclosureThe CEN‑IO‑COM‑202 features the Crestron IFE form factor, a compact Integrator Friendly Enclosure design that fits almost anywhere and enables a variety of installation options. Its shape allows multiple CEN‑IO and other IFE compliant devices to be stacked together. Using the included mounting bracket, it can be fastened to a flat surface or snapped onto a standard DIN rail. Rack mount and pole mount kits are also available.1 Key FeaturesCompact, cost-effective wireless network I/O extenderCommunicates to the local network over Wi-Fi® wireless communicationsUp to five wireless access points can be memorizedProvides two bidirectional RS-232 COM ports with hardware and software handshakingInstaller setup via Crestron Toolbox™ software or web browserSupports TLS 1.2 and Local Authentication security protocolsPowered via included 5 VDC power packCompact, stackable IFE micro form factorSurface or DIN rail mountableAvailable rack mount and pole mount options

The Crestron® CEN-IO-DIGIN-104 is a compact and cost-effective wired I/O module designed to easily expand the available digital inputs within a commercial or residential system. A small form factor allows the CEN-IO-DIGIN-104 to be placed just about anywhere, with the option to attach it to a flat surface or DIN rail using the included mounting bracket. The four onboard digital inputs enable direct integration with all kinds of third-party equipment.The CEN-IO-DIGIN-104 communicates to the local network using the available LAN connection, allowing the connected equipment to be remotely controlled and monitored from a computer or tablet. Power is conveniently supplied to the CEN-IO-DIGIN-104 via PoE (Power over Ethernet) or a Crestron control system, eliminating the need for a local power supply or extra wiring.Security Protocols:The CEN-IO-DIGIN-104 supports the following security protocols to help protect against service interruptions and malicious intrusions:TLS 1.2 for web server and control system connectionsLocal Authentication for console, web server, and control system connectionsSSL for console connectionsPower over EthernetUsing PoE technology, the CEN-IO-DIGIN-104 gets its operating power directly through the LAN wiring. PoE eliminates the need for a local power supply or any dedicated power wiring. A PoE Injector (PWE-4803RU) simply connects in line with the LAN cable at any convenient location. Crestron PoE switches (CEN-SW-POE-5 or CEN-SWPOE-16) may also be used to provide a total networking solution with built-in PoE. All PoE injectors and switches are sold separately.Integrator Friendly EnclosureThe CEN-IO-DIGIN-104 features the Crestron IFE form factor, a compact "Integrator Friendly Enclosure" design that fits almost anywhere and enables a variety of installation options. Its shape allows multiple CEN-IO and other IFE compliant devices to be stacked together. Using the included mounting bracket, it can be fastened to any flat surface or snapped onto a standard DIN rail. Rack mount and pole mount kits are also available.[1] Key FeaturesCompact, cost-effective wired Ethernet I/O moduleProvides four digital inputsInstaller setup via Crestron Toolbox™ software or web browserSupports TLS 1.2, Local Authentication, and SSL security protocolsPoE (Power over Ethernet) network poweredCompact, stackable "IFE micro" form factorSurface or DIN rail mountableAvailable rack mount and pole mount options[1]

The Crestron® CEN‑IO‑DIGIN‑204 is a compact and cost‑effective wireless I/O extender designed to easily expand the available digital inputs within a commercial or residential system. A small form factor allows the CEN‑IO‑DIGIN‑204 to be placed just about anywhere, with the option to attach it to a flat surface or DIN rail using the included mounting bracket. The four onboard digital inputs enable direct integration with all kinds of third-party equipment.The CEN‑IO‑DIGIN‑204 communicates to the local network over Wi‑Fi® wireless communications, allowing the connected equipment to be remotely controlled and monitored from a computer or tablet. Power is conveniently supplied to the CEN‑IO‑DIGIN‑204 via an included 5 VDC power pack.Security ProtocolsThe CEN‑IO‑DIGIN‑204 supports the following security protocols to help protect against service interruptions and malicious intrusions:TLS 1.2 for control system connectionsLocal Authentication for console and control system connectionsAdvanced Wi-Fi Wireless PerformanceCrestron enhanced Wi‑Fi performance is optimized to deliver fast, dependable wireless communications with a 50 ft (15 m) omnidirectional range (conditions permitting). The choice of 802.11 a, b, g, and n protocols affords reliable, high‑speed wireless connectivity in most RF environments. Up to five wireless access points can be memorized for easy connectivity within larger networks.Integrator Friendly EnclosureThe CEN‑IO‑DIGIN‑204 features the Crestron IFE form factor, a compact Integrator Friendly Enclosure design that fits almost anywhere and enables a variety of installation options. Its shape allows multiple CEN‑IO and other IFE compliant devices to be stacked together. Using the included mounting bracket, it can be fastened to a flat surface or snapped onto a standard DIN rail. Rack mount and pole mount kits are also available.1 Key FeaturesCompact, cost-effective wireless network I/O extenderCommunicates to the local network over Wi-Fi® wireless communicationsUp to five wireless access points can be memorizedProvides four digital inputsInstaller setup via Crestron Toolbox™ software or web browserSupports TLS 1.2 and Local Authentication security protocolsPowered via included 5 VDC power packCompact, stackable IFE micro form factorSurface or DIN rail mountableAvailable rack mount and pole mount options

The Crestron® CEN-IO-IR-104 is a compact and cost-effective wired I/O module designed to easily expand the available IR/Serial ports within a commercial or residential system. A small form factor allows the CEN-IO-IR-104 to be placed just about anywhere, with the option to attach it to a flat surface or DIN rail using the included mounting bracket. The four onboard IR/1-way Serial ports enable direct integration with all kinds of third-party equipment.The CEN-IO-IR-104 communicates to the local network using the available LAN connection, allowing the connected equipment to be remotely controlled and monitored from a computer or tablet. Power is conveniently supplied to the CEN-IO-IR-104 via PoE (Power over Ethernet) or a Crestron control system, eliminating the need for a local power supply or extra wiring.Security Protocols:The CEN-IO-IR-104 supports the following security protocols to help protect against service interruptions and malicious intrusions:TLS 1.2 for web server and control system connectionsLocal Authentication for console, web server, and control system connectionsSSL for console connectionsPower over EthernetUsing PoE technology, the CEN-IO-IR-104 gets its operating power directly through the LAN wiring. PoE eliminates the need for a local power supply or any dedicated power wiring. A PoE Injector (PWE-4803RU) simply connects in line with the LAN cable at any convenient location. Crestron PoE switches (CEN-SW-POE-5 or CEN-SWPOE-16) may also be used to provide a total networking solution with built-in PoE. All PoE injectors and switches are sold separately.Integrator Friendly EnclosureThe CEN-IO-IR-104 features the Crestron IFE form factor, a compact "Integrator Friendly Enclosure" design that fits almost anywhere and enables a variety of installation options. Its shape allows multiple CEN-IO and other IFE compliant devices to be stacked together. Using the included mounting bracket, it can be fastened to any flat surface or snapped onto a standard DIN rail. Rack mount and pole mount kits are also available.[1] Key FeaturesCompact, cost-effective wired Ethernet I/O moduleProvides four IR/1-way Serial portsInstaller setup via Crestron Toolbox™ software or web browserSupports TLS 1.2, Local Authentication, and SSL security protocolsPoE (Power over Ethernet) network poweredCompact, stackable "IFE micro" form factorSurface or DIN rail mountableAvailable rack mount and pole mount options[1]

The Crestron® CEN‑IO‑IR‑204 is a compact and cost‑effective wireless I/O extender designed to easily expand the available IR/serial ports within a commercial or residential system. A small form factor allows the CEN‑IO‑IR‑204 to be placed just about anywhere, with the option to attach it to a flat surface or DIN rail using the included mounting bracket. The four onboard IR/1-way serial ports enable direct integration with all kinds of third-party equipment.The CEN‑IO‑IR‑204 communicates to the local network over Wi‑Fi® wireless communications, allowing the connected equipment to be remotely controlled and monitored from a computer or tablet. Power is conveniently supplied to the CEN‑IO‑IR‑204 via an included 5 VDC power pack.Security ProtocolsThe CEN‑IO‑IR‑204 supports the following security protocols to help protect against service interruptions and malicious intrusions:TLS 1.2 for control system connectionsLocal Authentication for console and control system connectionsAdvanced Wi-Fi Wireless PerformanceCrestron enhanced Wi‑Fi performance is optimized to deliver fast, dependable wireless communications with a 50 ft (15 m) omnidirectional range (conditions permitting). The choice of 802.11 a, b, g, and n protocols affords reliable, high‑speed wireless connectivity in most RF environments. Up to five wireless access points can be memorized for easy connectivity within larger networks.Integrator Friendly EnclosureThe CEN‑IO‑IR‑204 features the Crestron IFE form factor, a compact Integrator Friendly Enclosure design that fits almost anywhere and enables a variety of installation options. Its shape allows multiple CEN‑IO and other IFE compliant devices to be stacked together. Using the included mounting bracket, it can be fastened to a flat surface or snapped onto a standard DIN rail. Rack mount and pole mount kits are also available.1 Key FeaturesCompact, cost-effective wireless network I/O extenderCommunicates to the local network over Wi-Fi® wireless communicationsUp to five wireless access points can be memorizedProvides four IR/1-way serial portsInstaller setup via Crestron Toolbox™ software or web browserSupports TLS 1.2 and Local Authentication security protocolsPowered via included 5 VDC power packCompact, stackable IFE micro form factorSurface or DIN rail mountableAvailable rack mount and pole mount options

The CGDMX-512BI is a serial to DMX512 interface which makes easy interfacing possible between a CRESTRON control system and lighting products using the DMX512 protocol.Only one serial RS-232/422 port on the Crestron control system is required to communicate with the DMX512 interface.The DMX Interface has two separate DMX Ports, one DMX Out to send data to the DMX lighting products and one DMX In to receive data from e.g. DMX512 lighting consoles or other DMX512 control units. The CGDMX-512BI can operate in different modes, to process the incoming DMX512 data with the Crestron data like HTP1, LTP2 and exclusive3 handling. The Crestron media processor is able to change these modes, too. Furthermore the Crestron media processor can set the HTP, LTP and exclusive handling for each channel separately.

The Crestron CGEIB-IP is a control interface by which a Crestron control systemcan be coupled to a KNX (previously known as EIB) installation using either RS232or Ethernet (TCP/IP). Also, the Crestron CGEIB-IP filters the desired informationout of received KNX/EIB messages and sends them to the Crestron control systemvia the same interface (RS232 or TCP/IP), which provides the Crestron installationwith live updates of the KNX/EIB installation.Crestron always provided a valuable solution to interoperate with a KNX/EIBnetwork by means of the CGEIB: a DIN-rail mountable EIB node that could becontrolled only over RS-232. Crestron has expanded their CGEIB with thepossibility to be controlled over TCP-IP. This CGEIB-IP is a new unit that replacesthe CGEIB, but as it still holds an RS-232 port as well, it is perfectly backwardscompatible. So, for replacing the CGEIB in an existing installation, one can installthis CGEIB-IP.

The DIN‑DALI‑2 is a DALI‑2™ certified DALI® interface for Crestron® systems that provides control of up to 2 individual DALI loops. Housed in a DIN-rail enclosure, the DIN‑DALI‑2 is a low-profile Cresnet® or Ethernet companion to most Crestron DIN rail processors and control systems. In addition to controlling the DALI data bus, it includes an integrated DALI power supply. Single-wire connectivity simplifies both new and retrofit installations, and Power-over-Ethernet (PoE) versatility assists in situations with existing CAT5 infrastructure.This product is only available as part of a complete engineered and commissioned Crestron Green Light® system Contact Sales Support Services to obtain a quote for Factory Engineering Services and On-Site Commissioning.Two DALI ChannelsThe dual-channel DALI outputs on the DIN‑DALI‑2 makes controlling up to 128 individual DALI ballasts easy. The Digital Addressable Lighting Interface (DALI) is a protocol used for the control of lighting in buildings and is found on ballasts available from many manufacturers. Since it offers ballast-level control, lighting loads powered from the same feed can be controlled individually. DALI is a great choice for retrofit lighting systems because it does not require changes in line voltage wiring. Likewise, DALI provides ultimate flexibility by allowing reconfiguring of zones after a system is installed.Integrated DALI Power SupplyThe innovative design of the DIN‑DALI‑2 eliminates the need for the external power supplies required by other DALI controllers on the market. Power is delivered via PoE or Cresnet1, creating a true single-wire installation. Both Cresnet and PoE are capable of powering all 128 DALI ballast controllers. If desired, an external power supply may be used in conjunction with the DIN‑DALI‑2. An on-board switch allows the installer to choose the required mode during setup.Commissioning ToolDesigned specifically for the DIN‑DALI‑2, the Crestron DALI commissioning software tool facilitates system setup. The intuitive menu-driven wizard provides step-by-step configuration of ballast properties, groups, and scenes. Guided by the software, one can simply set the ballast address and check connectivity status, edit minimum/maximum levels and fade time, and change ballast groupings and scenes. This powerful software makes ballast replacement straightforward through automatic identification of new hardware IDs. Settings from old ballasts are transferred to replacements with just a few mouse clicks, saving time and eliminating guess work and frustration.Familiar Programming InterfaceControlling a DALI ballast is just like controlling any Crestron dimmer. Familiar visual Crestron configuration tools, as found in D3 Pro® and SIMPL, replace complex hardware addressing and communication protocols. Crestron D3 Pro software eliminates the need for custom programming, providing a complete design, development, and documentation solution for the lighting professional.Override InputAn override input is provided to allow an external contact closure to momentarily override the control system program and force each ballast into its defined System Failure Level. States can be set and saved locally from the front panel, or remotely via software.DIN Rail InstallationThe DIN‑DALI‑2 is designed to snap onto a standard DIN rail for installation in a wall mount enclosure. Wiring connections are made using screw terminals positioned along the top and bottom, clearly accessible from the front for easy installation and servicing. All setup controls and indicators are positioned on the center front panel. When the DIN‑DALI‑2 is installed in an enclosure utilizing 45 mm cutouts, the front panel stays accessible while the connections are concealed.Cresnet® and PoEThe DIN‑DALI‑2 communicates with a DIN‑DALI‑2 Automation Processor, or most other Crestron control systems, via the Cresnet control network or Power-over-Ethernet (PoE). A pair of Cresnet ports on the DIN‑DALI‑2 allows for easy daisy-chaining of several DIN Rail Series automation control modules. A standard Ethernet jack accommodates data and power to be delivered to the unit over one CAT5 cable.NOTE: The DIN‑DALI‑2 is not compatible with Crestron 2‑Series control systems or earlier. Key FeaturesInterfaces with 2 independent DALI® loopsDALI-2™ certifiedControls up to 128 DALI ballastsCresnet® or PoE communication for single-wire installationIntegrated DALI power supplyCrestron® DALI commissioning tool for easy setupOverride input9M wide DIN rail mountingCEC Title 24 2013 Compliant

The Crestron® DIN-DMX-1UNIVERSE is a Pharos LPC (Lighting Playback Controller) all-in-one control solution for themed entertainment and LED lighting installations.Pharos EngineThe intelligent Pharos Engine gives you complete control of your installation. The DIN-DMX-1UNIVERSE provides individually controllable and independently running timelines and scenes allowing you to build dynamic, precise, and fully customizable preprogrammed lighting displays. Additionally, it provides you with the freedom of real-time manual overrides, flexible multizone control, prioritization, and more.Pharos MappingDesign the big picture — control every pixel. Create a map of your fixtures within the Designer software, then use Pharos Mapping to create visually striking effects or play video across the entire array. Powerful controls allow you to build maps fast with pixel-precise adjustment. Multiple maps can be created to support different zones or for modeling different views of your installation.Pharos TriggerControl your lighting with responsive, reactive programming. Pharos Trigger is a rules engine that uses conditional logic and a broad range of interfaces and protocols. Send and receive any command to and from any system. Conditional logic is supported, along with a powerful built-in scripting language for unlimited flexibility.Scalable for Any InstallationThe right fit for every installation. Multiple Pharos controllers can be seamlessly linked together to work as one via a standard Ethernet network giving impressive scalability. For additional integration options, add remote devices to extend the network further. Whether one controller or many, it’s all easily programmed using our Designer software.Remote ManagementThe control you need in your browser — from anywhere. Pharos Controllers can be connected to a network, making it possible for you to manage your installation remotely. The built-in web server lets you check the Controller’s status, inputs and outputs, trigger timelines, view a full history log, and more.Handles Multiple Lighting ProtocolsBe limited by your design brief, not your control system. The DIN-DMX-1UNIVERSE supports a vast range of different fixture types and can output multiple DMX-over-Ethernet (eDMX) lighting protocols at the same time to provide an unparalleled level of flexibility and control over your project.DIN Rail MountingThe DIN-DMX-1UNIVERSE is designed to snap onto a standard DIN rail for installation in a wall mount enclosure (Crestron DIN-EN series or similar, not supplied) or on a wall panel. Key FeaturesPharos engine for complete control of the installationBuild dynamic, precise, fully customizable pre-programmed lighting displays512 DMX/eDMX Channels, 1 UniverseScalable to the size of your lighting displayControl a wide range of devicesReliable 24/7 operation8U 35 mm DIN rail mountable

The DIN-KXI is an IP-based KNX interface that allows a 4-Series® control system to communicate with a KNX system. It is capable of addressing and controlling up to 1,000 datapoints and receives power over the KNX bus. The DIN-KXI can also be used as a programming interface for KNX devices using ETS5 or ETS6 software.KNX SecurityThe device supports KNX Security (AES-128) which can be enabled using ETS software.Ethernet CommunicationsThe Ethernet connection allows access to the KNX bus from any point on the LAN. This provides programming and diagnostics without direct access to the DIN-KXI. Local DiagnosticsThe buttons and LEDs on the device provide diagnostic data including the operating status and communication errors.DIN Rail InstallationThe 1M (18 mm) wide DIN-KXI snaps onto a standard DIN rail for installation in a wall mount enclosure. Wiring connections are made along the top and bottom, clearly accessible from the front for easy installation and servicing. All setup controls and indicators are positioned on the center front panel. Key Features1M wide DIN rail mountingEthernet to KNX interfaceIntegrates KNX with a Crestron® control systemSupports KNXnet/IP Security (AES-128)Controls up to 1,000 KNX datapointsUp to 8 simultaneous KNXnet/IP Tunneling connectionsConfigure using ETS SoftwareOn-board controls for setup and diagnosticsPowered via the KNX bus

The Crestron DIN-SACN-DMX (sold by ENTTEC as model DIN Ethergate Mk2) is a cost-effective and reliable Ethernet to DMX convertor. It supports sACN, Art-Net, and ESP protocols, and integrates DMX and network controllable lighting devices and systems. As part of a Crestron architectural lighting system, it allows a 3-Series® or 4-Series™ control processor to communicate via sACN with any DMX lighting fixture or controller.The DIN-SACN-DMX's electrically insulated housing supports TS35 DIN and surface mounting for fast installation. In addition, pluggable terminal blocks with an inbuilt termination line make wiring simple. Key FeaturesConverts between DMX512A and sACN, Art-Net, and ESP protocolsEnables distribution of DMX over a Ethernet or Wi-Fi® networkEnables control of DMX lighting fixtures and systems by Crestron devicesSupports a single universe Ethernet to DMX node in output modeSupports a single universe DMX to Ethernet node in input modeSupports broadcast or unicast (unicast in input mode only)Supports HTP/LTP merging of up to 2 DMX sources (output mode only)Supports RDM over Art-NetEasy web browser-based setup and firmware updates4U 72 mm DIN rail mountablePoE or 12-24VDC powered (power supply not included)