Amplifier without DSP

Ideal for zone-expansion applications, Bose Professional PowerSpace amplifiers enhance any premium commercial sound installation with clean, reliable power — and digital connectivity. A Bose Professional AmpLink input allows for multiple channels of uncompressed, low-latency digital audio from Bose Professional DSPs via a single Cat 5 cable. The PowerSpace P21000A provides 1000 watts per channel and features versatile outputs that give you the flexibility to deliver full channel power to either low- or high-impedance loads — without bridging — and even send double power to a single zone. For premium commercial applications, PowerSpace amplifiers provide the power and performance to get the job done — pure and simple. FEATURES 1000 watts per channel and works seamlessly with loudspeakers, DSPs, and controls to create complete commercial sound systems AmpLink input for simplified multichannel digital audio connection to compatible DSPs, reducing terminations and related points of failure Load-independent outputs deliver full channel power to either low-impedance loads (4-8 Ω) or high-impedance (70/100V) loads without bridging I-Share outputs deliver 2x power level by combining the current of two channels Auto-standby mode saves power when audio signal falls below a set threshold, then wakes when audio returns Applications Designed for a wide range of applications, including: Retail stores Restaurants and bars Hospitality venues Conference centers Schools Auxiliary zones SPECS Technical Specification AMPLIFICATION Channel Separation (Crosstalk) > 80 dB at 1 kHz, > 65 dB at 20 kHz Dynamic Range ≥ 100 dB at rated power, A-weighted Gain, High-Impedance 35 dB, 70V mode / 38 dB, 100V mode Gain, Low-Impedance 38 dB Maximum Peak Power, Symmetrical 2000 W Frequency Response 20 Hz – 20 kHz (±1 dB) at 1 W, 4–8 Ω / 20 Hz – 20 kHz (±1 dB) at 1 W with 50 Hz high-pass filter, 70/100V Number of Channels 2 Power Class Class D Rated Power, Symmetrical 1000 W THD+N < 0.04% at 1 kHz, 4–8 Ω, 70V/100V AUDIO INPUTS, ANALOG Input Channels 2 balanced Connectors (1) 6-pin Euroblock Input Impedance 10 kΩ Maximum Input Level 22 dBu at 14 dBu sensitivity Sensitivity -10 dBV, 4 dBu, 14 dBu AUDIO INPUTS/OUTPUTS, DIGITAL Channels 8 AmpLink in, 8 AmpLink thru Connectors (1) RJ-45 AmpLink in / (1) RJ-45 AmpLink thru Type 6-pin Euroblock AUDIO OUTPUTS, ANALOG Channels 2 Connectors (1) 4-terminal block COMPLIANCE EMC This product meets all EN55103-2 immunity requirements for E2 electromagnetic environment. ELECTRICAL Mains Connector IEC 60320-C14 inlet Mains Voltage 100–240 VAC (±10%), 50/60 Hz AC Power Consumption 25 W auto-standby, 570 W maximum INDICATORS AND CONTROLS Controls, Front Panel (1) power button Controls, Rear Panel Mute, output attenuators, DIP switches for amplifier configuration, input selector, update port, gain/sensitivity LED Status Indicators (1) power/status LED, (4) input signal LEDs, (4) output limit LEDs INTEGRATED DSP DSP-Enabled No PHYSICAL Colors Gray Cooling System Microprocessor-controlled variable-speed fans, front-to-back air flow Suspension/Mounting Rack-mounting Operating Temperature Range 0 °C to 40 °C (32 °F to 104 °F) Product Dimensions (H×W×D) 1.7 in × 19.0 in × 16.5 in (44 mm × 483 mm × 420 mm) Net Weight 14.6 lb (6.6 kg) Rack Spaces 1 Shipping Weight 19.0 lb (8.6 kg)  

Ideal for zone-expansion applications, Bose Professional PowerSpace amplifiers enhance any premium commercial sound installation with clean, reliable power — and digital connectivity. A Bose Professional AmpLink input allows for multiple channels of uncompressed, low-latency digital audio from Bose Professional DSPs via a single Cat 5 cable. The PowerSpace P2600A provides 600 watts per channel and features versatile outputs that give you the flexibility to deliver full channel power to either low- or high-impedance loads — without bridging — and even send double power to a single zone. For premium commercial applications, PowerSpace amplifiers provide the power and performance to get the job done — pure and simple. FEATURES 600 watts per channel and works seamlessly with loudspeakers, DSPs, and controls to create complete commercial sound systems AmpLink input for simplified multichannel digital audio connection to compatible DSPs, reducing terminations and related points of failure Load-independent outputs deliver full channel power to either low-impedance loads (4-8 Ω) or high-impedance (70/100V) loads without bridging I-Share outputs deliver 2x power level by combining the current of two channels Auto-standby mode saves power when audio signal falls below a set threshold, then wakes when audio returns Applications Designed for a wide range of applications, including: Retail stores Restaurants and bars Hospitality venues Conference centers Schools Auxiliary zones   SPECS Technical Specification AMPLIFICATION Channel Separation (Crosstalk) > 80 dB at 1 kHz, > 65 dB at 20 kHz Dynamic Range ≥ 100 dB at rated power, A-weighted Gain, High-Impedance 35 dB, 70V mode / 38 dB, 100V mode Gain, Low-Impedance 35 dB Maximum Peak Power, Symmetrical 1200 W Frequency Response 20 Hz – 20 kHz (±1 dB) at 1 W, 4–8 Ω / 20 Hz – 20 kHz (±1 dB) at 1 W with 50 Hz high-pass filter, 70/100V Number of Channels 2 Power Class Class D Rated Power, Symmetrical 600 W THD+N < 0.04% at 1 kHz, 4–8 Ω, 70V/100V AUDIO INPUTS, ANALOG Input Channels 2 balanced Connectors (1) 6-pin Euroblock Input Impedance 10 kΩ Maximum Input Level 22 dBu at 14 dBu sensitivity Sensitivity -10 dBV, 4 dBu, 14 dBu AUDIO INPUTS/OUTPUTS, DIGITAL Channels 8 AmpLink in, 8 AmpLink thru Connectors (1) RJ-45 AmpLink in / (1) RJ-45 AmpLink thru Type 6-pin Euroblock AUDIO OUTPUTS, ANALOG Channels 2 Connectors (1) 4-terminal block COMPLIANCE EMC This product meets all EN55103-2 immunity requirements for E2 electromagnetic environment. ELECTRICAL Mains Connector IEC 60320-C14 inlet Mains Voltage 100–240 VAC (±10%), 50/60 Hz AC Power Consumption 25 W auto-standby, 570 W maximum INDICATORS AND CONTROLS Controls, Front Panel (1) power button Controls, Rear Panel Mute, output attenuators, DIP switches for amplifier configuration, input selector, update port, gain/sensitivity LED Status Indicators (1) power/status LED, (4) input signal LEDs, (4) output limit LEDs INTEGRATED DSP DSP-Enabled No PHYSICAL Colors Gray Cooling System Microprocessor-controlled variable-speed fans, front-to-back air flow Suspension/Mounting Rack-mounting Operating Temperature Range 0 °C to 40 °C (32 °F to 104 °F) Product Dimensions (H×W×D) 1.7 in × 19.0 in × 16.5 in (44 mm × 483 mm × 420 mm) Net Weight 13.7 lb (6.2 kg) Rack Spaces 1 Shipping Weight 18.1 lb (8.2 kg) Product codes 803286-1110 120V US 803286-2110 230V EU 803286-5110 230V AU 803286-4110 230V UK 803286-3110 100V JP Warranty Period 5 years Included in Packaging (1) 2-pin Euroblock connector (1) Cat 5e cable, 3.3 ft (1 m) (2) 3-pin Euroblock connectors (1) I-Share jumper (5) terminal forks, 14–16 AWG (1) PowerSpace P2600A (1) installation guide (1) IEC power cord  

Ideal for zone-expansion applications, Bose Professional PowerSpace amplifiers enhance any premium commercial sound installation with clean, reliable power — and digital connectivity. A Bose Professional AmpLink input allows for multiple channels of uncompressed, low-latency digital audio from Bose Professional DSPs via a single Cat 5 cable. The PowerSpace P4300A provides 300 watts per channel and features versatile outputs that give you the flexibility to deliver full channel power to either low- or high-impedance loads — without bridging — and even send double power to a single zone. For premium commercial applications, PowerSpace amplifiers provide the power and performance to get the job done — pure and simple.   FEATURES 300 watts per channel and works seamlessly with loudspeakers, DSPs, and controls to create complete commercial sound systems   AmpLink input for simplified multichannel digital audio connection to compatible DSPs, reducing terminations and related points of failure   Load-independent outputs deliver full channel power to either low-impedance loads (4-8 Ω) or high-impedance (70/100V) loads without bridging   I-Share outputs deliver 2x power level by combining the current of two channels   Auto-standby mode saves power when audio signal falls below a set threshold, then wakes when audio returns   Applications Designed for a wide range of applications, including: Retail stores Restaurants and bars Hospitality venues Conference centers Schools Auxiliary zones SPECS Technical Specification AMPLIFICATION Channel Separation (Crosstalk) > 80 dB at 1 kHz, > 65 dB at 20 kHz Dynamic Range ≥ 100 dB at rated power, A-weighted Gain, High-Impedance 35 dB, 70V mode / 38 dB, 100V mode Gain, Low-Impedance 32 dB Maximum Peak Power, Symmetrical 600 W Frequency Response 20 Hz – 20 kHz (±1 dB) at 1 W, 4–8 Ω / 20 Hz – 20 kHz (±1 dB) at 1 W with 50 Hz high-pass filter, 70/100V Number of Channels 4 Power Class Class D Rated Power, Symmetrical 300 W THD+N < 0.04% at 1 kHz, 4–8 Ω, 70V/100V AUDIO INPUTS, ANALOG Input Channels 4 balanced Connectors (2) 6-pin Euroblock Input Impedance 10 kΩ Maximum Input Level 22 dBu at 14 dBu sensitivity Sensitivity -10 dBV, 4 dBu, 14 dBu AUDIO INPUTS/OUTPUTS, DIGITAL Channels 8 AmpLink in, 8 AmpLink thru Connectors (1) RJ-45 AmpLink in / (1) RJ-45 AmpLink thru Type 2 × 6-pin Euroblock AUDIO OUTPUTS, ANALOG Channels 4 Connectors (1) 8-terminal block COMPLIANCE EMC This product meets all EN55103-2 immunity requirements for E2 electromagnetic environment. ELECTRICAL Mains Connector IEC 60320-C14 inlet Mains Voltage 100–240 VAC (±10%), 50/60 Hz AC Power Consumption 25 W auto-standby, 570 W maximum INDICATORS AND CONTROLS Controls, Front Panel (1) power button Controls, Rear Panel Mute, output attenuators, DIP switches for amplifier configuration, input selector, update port, gain/sensitivity LED Status Indicators (1) power/status LED, (4) input signal LEDs, (4) output limit LEDs INTEGRATED DSP DSP-Enabled No PHYSICAL Colors Gray Cooling System Microprocessor-controlled variable-speed fans, front-to-back air flow Suspension/Mounting Rack-mounting Operating Temperature Range 0 °C to 40 °C (32 °F to 104 °F) Product Dimensions (H×W×D) 1.7 in × 19.0 in × 16.5 in (44 mm × 483 mm × 420 mm) Net Weight 14.6 lb (6.6 kg) Rack Spaces 1 Shipping Weight 19.0 lb (8.6 kg) VIDEOs     Product codes 803288-1110 120V US 803288-2110 230V EU 803288-5110 230V AU 803288-4110 230V UK 803288-3110 100V JP Warranty Period 5 years Included in Packaging (1) 2-pin Euroblock connector (2) I-Share jumpers (10) terminal forks, 14–16 AWG (1) Cat 5e cable, 3.3 ft (1 m) (4) 3-pin Euroblock connectors (1) PowerSpace P4300A (1) installation guide (1) IEC power cord