DIN-DALI-2 - Discontinued -
€712.81
% Regular price: €1,063.86 (33% saved)
Available, delivery time: 1-3 days
Product information "DIN-DALI-2 - Discontinued - "
The DIN‑DALI‑2 is a DALI‑2™ certified DALI® interface for Crestron® systems that provides control of up to 2 individual DALI loops. Housed in a DIN-rail enclosure, the DIN‑DALI‑2 is a low-profile Cresnet® or Ethernet companion to most Crestron DIN rail processors and control systems. In addition to controlling the DALI data bus, it includes an integrated DALI power supply. Single-wire connectivity simplifies both new and retrofit installations, and Power-over-Ethernet (PoE) versatility assists in situations with existing CAT5 infrastructure.
This item is no longer being manufactured. We recommend the DIN-DLI as a successor; please see below. Please feel free to contact us if you have any questions.
This product is only available as part of a complete engineered and commissioned Crestron Green Light® system Contact Sales Support Services to obtain a quote for Factory Engineering Services and On-Site Commissioning.
Two DALI Channels
The dual-channel DALI outputs on the DIN‑DALI‑2 makes controlling up to 128 individual DALI ballasts easy. The Digital Addressable Lighting Interface (DALI) is a protocol used for the control of lighting in buildings and is found on ballasts available from many manufacturers. Since it offers ballast-level control, lighting loads powered from the same feed can be controlled individually. DALI is a great choice for retrofit lighting systems because it does not require changes in line voltage wiring. Likewise, DALI provides ultimate flexibility by allowing reconfiguring of zones after a system is installed.
Integrated DALI Power Supply
The innovative design of the DIN‑DALI‑2 eliminates the need for the external power supplies required by other DALI controllers on the market. Power is delivered via PoE or Cresnet1, creating a true single-wire installation. Both Cresnet and PoE are capable of powering all 128 DALI ballast controllers. If desired, an external power supply may be used in conjunction with the DIN‑DALI‑2. An on-board switch allows the installer to choose the required mode during setup.
Commissioning Tool
Designed specifically for the DIN‑DALI‑2, the Crestron DALI commissioning software tool facilitates system setup. The intuitive menu-driven wizard provides step-by-step configuration of ballast properties, groups, and scenes. Guided by the software, one can simply set the ballast address and check connectivity status, edit minimum/maximum levels and fade time, and change ballast groupings and scenes. This powerful software makes ballast replacement straightforward through automatic identification of new hardware IDs. Settings from old ballasts are transferred to replacements with just a few mouse clicks, saving time and eliminating guess work and frustration.
Familiar Programming Interface
Controlling a DALI ballast is just like controlling any Crestron dimmer. Familiar visual Crestron configuration tools, as found in D3 Pro® and SIMPL, replace complex hardware addressing and communication protocols. Crestron D3 Pro software eliminates the need for custom programming, providing a complete design, development, and documentation solution for the lighting professional.
Override Input
An override input is provided to allow an external contact closure to momentarily override the control system program and force each ballast into its defined System Failure Level. States can be set and saved locally from the front panel, or remotely via software.
DIN Rail Installation
The DIN‑DALI‑2 is designed to snap onto a standard DIN rail for installation in a wall mount enclosure. Wiring connections are made using screw terminals positioned along the top and bottom, clearly accessible from the front for easy installation and servicing. All setup controls and indicators are positioned on the center front panel. When the DIN‑DALI‑2 is installed in an enclosure utilizing 45 mm cutouts, the front panel stays accessible while the connections are concealed.
Cresnet® and PoE
The DIN‑DALI‑2 communicates with a DIN‑DALI‑2 Automation Processor, or most other Crestron control systems, via the Cresnet control network or Power-over-Ethernet (PoE). A pair of Cresnet ports on the DIN‑DALI‑2 allows for easy daisy-chaining of several DIN Rail Series automation control modules. A standard Ethernet jack accommodates data and power to be delivered to the unit over one CAT5 cable.
NOTE: The DIN‑DALI‑2 is not compatible with Crestron 2‑Series control systems or earlier.
Key Features
- Interfaces with 2 independent DALI® loops
- DALI-2™ certified
- Controls up to 128 DALI ballasts
- Cresnet® or PoE communication for single-wire installation
- Integrated DALI power supply
- Crestron® DALI commissioning tool for easy setup
- Override input
- 9M wide DIN rail mounting
- CEC Title 24 2013 Compliant
Login
Nachfolgemodell
The DIN-DLI is a DALI-2™ certified DALI® interface for Crestron control systems that provides control of one DALI loop. Housed in a 3M DIN-rail enclosure, the compact DIN-DLI is capable of controlling DT0, DT1, DT2, DT3, DT4, DT5, DT6, DT7, and DT8 (Tc)2 DALI devices. Crestron control system connection is provided through a Cresnet® wired or Ethernet with PoE connection. DALI devices can be commissioned through an intuitive web user interface. The DIN-DLI also offers unique features that improve the flexibility and performance of DALI® systems in ways that will help you to be successful with your DALI installationOne DALI LoopThe single DALI loop on the DIN‑DLI enables control of up to 64 individual DALI devices. With DALI's device level control, lighting loads powered from the same feed can be controlled individually. DALI allows layout changes without new circuit wiring, providing flexibility by allowing zone reconfiguration after a system is installed.Integrated DALI Power SupplyThe design of the DIN‑DLI eliminates the need for external power supplies required by other DALI controllers on the market. Power1 is delivered via PoE or Cresnet, creating a true single-wire installation. Both Cresnet and PoE are capable of powering the communications of all 64 DALI ballast controllers.Override InputOverride input is provided to allow an external contact closure to momentarily override the control system program and set each channel output to its override preset level. Factory default override values on DALI devices can be adjusted through the DIN-DLI web user interface.DIN Rail InstallationThe 3M 2.08 in. (52.83 mm) wide DIN‑DLI snaps onto a standard DIN rail for installation in a wall mount enclosure. When installed in an enclosure utilizing 45 mm cutouts, the front panel stays accessible while the connections are concealed.Module to Module ConnectorsModule to Module connectors quickly connect Cresnet and Override between modules without the need for additional wiring or tools.Cresnet® and PoEThe DIN‑DLI communicates with Crestron control systems via the Cresnet control network or Power-over-Ethernet (PoE). A pair of Cresnet ports and module to module connectors allow for easy daisy-chaining of several DIN Rail Series automation control modules. An RJ45 connector enables both data and power to be transmitted to the unit using a single CAT5 or higher cable.NOTE: The DIN‑DLI is not compatible with Crestron 2‑Series control systems or earlier. Key FeaturesInterfaces with one independent DALI® loopDALI-2™ certifiedSupports DT0, DT1, DT2, DT3, DT4, DT5, DT6, DT7, and DT8 (Tc)2 DALI DevicesControls up to 64 DALI devicesEthernet or Cresnet® wired communicationPower using Cresnet network or PoE for single-wire installationProvides loop power for communicationCommissioned through Web UI or Crestron Home® OS for easy setupOverride input3M wide DIN rail mountingInternal diagnosticsWorks with the Crestron Home® OS