PowerSpace P4150+ versatile power amplifier

For background/foreground music and paging applications, the Bose Professional FreeSpace IZA 250-LZ and IZA 190-HZ integrated zone amplifiers are designed to deliver premium sound, provide simplified set up and easy daily operation, and offer the flexibility to expand when more loudspeakers are required. When used with FreeSpace FS2 and FS4 loudspeakers, even further sound optimization is possible through onboard selectable EQ presets. FEATURES Amplification for premium sound from a reliable, high quality Class-D amplifier provides optimized performance and premium sound quality through the use of internal digital signal processing Installation made simple with set up done locally from the front and rear panels of the amplifier—no computer is required Opti-Voice paging provides smooth automatic transition between the music and page signals End-user friendly front panel allows users to connect devices easily, make tonal adjustments or select between two sources. Optional wall mountable Bose Professional Volume control with A/B switch user interface allows volume and source selection controls to be placed away from the amplifier for user convenience Compact, lightweight design enables the FreeSpace integrated zone amplifier to be placed out of the way—on a table, desk, counter, shelf or in an equipment rack using the optional Rack Mount Kit accessory Applications Designed for a wide range of applications, including: Retail stores Restaurants and bars Hospitality venues Conference centers Schools Auxiliary zones SPECS Technical Specification AMPLIFICATION Channel Separation (Crosstalk) ≤ -60 dBV below rated power, 1 kHz Dynamic Range 88 dB Frequency Response 40 Hz – 20 kHz (+0 dB/-3 dB) at 1 W, 1 kHz reference Number of Channels 2 Power Class Class D Rated Power, Symmetrical 50 W per channel at 4 Ω / 25 W per channel at 8 Ω THD+N ≤ 0.3% at full rated power AUDIO INPUTS, ANALOG Adjustment Range -20 dB to +20 dB, line / 0 dB to +50 dB, mic/line / 0 dB to +50 dB, page / fixed, auxiliary Input Channels 2 unbalanced, line + 1 balanced, mic/line + 1 balanced, mic (page) + 1 unbalanced, line (auxiliary) Connectors (1) RCA stereo pair, (1) XLR-1/4-in combo, (1) 4-pin Euroblock, (1) 1/8-in (3.5 mm) TRS Input Impedance 20 kΩ, line / 2 kΩ, mic/line / 2 kΩ, page / 20 kΩ, auxiliary Input Range -10 dBV to +10 dBV, line / -60 dBV to +10 dBV, mic/line / -60 dBV to +10 dBV, page / 0 dBV to +10 dBV, auxiliary Maximum Input Level +10 dBV Nominal Input Level 0 dBV, line / -40 dBV, mic/line / -40 dBV, page / 0 dBV, auxiliary Sensitivity 0 dBV, auxiliary / N/A, line, mic/line, page AUDIO OUTPUTS, ANALOG Channels 2 Connectors (1) 2-terminal barrier strip, (1) RCA stereo pair Nominal Output Level 2 × 50 W at 4 Ω minimum / 0 dBV maximum (auxiliary) Output Impedance 4 Ω / 400 Ω (auxiliary) ELECTRICAL Current Draw, Inrush 7.6 A at 120 VAC, 60 Hz / 13.9 A at 230 VAC, 50 Hz Mains Connector IEC C14 inlet Mains Voltage 100–240 VAC (±10%), 50/60 Hz Protections High temperature, short circuit AC Power Consumption 15 W idle, 200 W maximum INDICATORS AND CONTROLS Controls, Front Panel (1) power switch, (1) input selection switch, (1) treble knob, (1) bass knob, (1) mic/line gain knob, (1) master level knob Controls, Rear Panel Amplifier Mode DIP switch, Loudspeaker EQ preset selector, Input Gain (A/B/Page mic), Output trim LED Status Indicators (1) power LED, (1) input clip LED INTEGRATED DSP A/D and D/A Converters 48 kHz / 24-bit Audio Latency 10.4 ms (analog input to analog output) Presets Flat, Bose Professional loudspeaker presets (FreeSpace FS2C/FS2P/FS2SE/FS4CE/FS4SE) Processing Functions Loudspeaker EQ, Opti-Voice EQ (paging), Dynamic EQ (low-end compensation) PHYSICAL Cooling System Natural convection Product Dimensions (H×W×D) 1.8 in × 8.4 in × 12.2 in (45 mm × 214 mm × 310 mm) Net Weight 4.8 lb (2.2 kg) Rack Spaces 1 RU high, half rack wide  

The Bose Professional PowerMatch PM8500N configurable professional power amplifier provides concert-quality sound with a high level of scalability and configurability for fixed installation sound reinforcement systems. Ethernet-based networking enables configuration, control and monitoring, and an expansion slot supports input from optional digital audio accessory cards. The front-panel USB connection allows for direct configuration PC connection to a single amplifier. PowerMatch amplifiers utilize numerous Bose Professional technologies to deliver an unprecedented combination of performance, efficiency and ease of installation—all in a reliable, proprietary design. FEATURES QuadBridge Technology — Allows the 4 available channels to be configured as Mono, V-Bridge, I-Share or Quad mode, allowing the total available power of the amplifier to be allocated to one or more output channels. The amplifier is capable of driving both low impedance and 70/100V loudspeaker loads directly. Bose Professional ControlSpace Designer software — PowerMatch amplifiers can be fully configured using ControlSpace Designer software via the front panel USB connection, or the rear panel Ethernet connection. Using ControlSpace Designer software you can access additional features including: Parametric EQ stages, load sweep of each output channel and auto standby. ControlSpace Designer software is also used to integrate network model PowerMatch amplifiers into larger control and monitoring systems comprised of Bose Professional ESP processors and CC control centers. Auto-Standby/Auto-Wake function — When enabled, this function automatically enters/exits Standby Mode, allowing the system to consume less power. Dual voltage and current feedback loop — Proprietary design combines Class-D efficiency with a unique current and voltage feedback loop circuit that continuously monitors and controls both the current and voltage delivered to the loudspeaker load. Independent of power level and load impedance, the amplifier consistently delivers the widest possible dynamic range, frequency response and lowest possible distortion. PeakBank power supply — Regenerative 4-quadrant power supply enables higher power density while allowing the re-use of energy from reactive loads that is normally wasted in conventional Class-D designs. This highly efficient amplifier design delivers sustainable and repeatable low frequency response. Fast-tracking power factor correction (PFC) — Efficiently manages the current drawn from the AC mains, allowing the amplifier to drive loudspeakers to maximum output longer without power fluctuation. PFC provides superior transient response and functions at peak burst power much longer than conventional Class-D amplifier designs to satisfy the requirements of even the most demanding program material. Applications Designed for a wide range of applications, including: Auditoriums Performing arts venues Theaters Houses of worship Arenas Hospitality venues SPECS Technical Specification AMPLIFICATION Channel Separation (Crosstalk) > 65 dB, adjacent channels at 1 kHz Gain, High-Impedance 42 dB Gain, Low-Impedance 36 dB, Mono mode / 42 dB, V-Bridge mode / 36 dB, I-Share mode / 42 dB, Quad mode Maximum Peak Power, Symmetrical 1000 W SNR > 102 dB (1 dB below rated power, A-weighted) Frequency Response 20 Hz – 20 kHz (±0.5 dB) at 1 W Number of Channels 8 Power Class Class D Rated Power, Symmetrical 450 W per channel at 2 Ω / 500 W per channel at 4 Ω / 300 W per channel at 8 Ω THD+N < 0.4% at 1 W (20 Hz – 20 kHz) AUDIO INPUTS, ANALOG Input Channels 8 balanced, line Connectors (8) 3-pin Euroblock Input Impedance > 100 kΩ Maximum Input Level 24 dBu at 24 dBu sensitivity Sensitivity 0 dBu, +4 dBu, +12 dBu, +24 dBu, selectable AUDIO INPUTS/OUTPUTS, DIGITAL Channels Expansion card-dependent Connectors Expansion card-dependent AUDIO OUTPUTS, ANALOG Channels 2–8, configurable Connectors (2) 8-pin Euroblock COMPLIANCE EMC This Product meets the immunity requirements for the E2 class EN55103-2 directive. ELECTRICAL Current Draw, Idle 0.3 A (standby) or 1.3 A (awake) at 120 VAC, 60 Hz / 0.1 A (standby) or 0.5 A (awake) at 230 VAC, 50 Hz Current Draw, Inrush 15.4 A at 230 VAC, 50 Hz Mains Connector IEC 60320-C20 inlet Mains Voltage 100–240 VAC, 50/60 Hz Protections High temperature, DC, short circuit, high frequency, voltage limiter, current limiter, inrush current, mains circuit breaker AC Power Consumption 31 W standby (idle), 176 W awake (idle), 1789 W maximum GENERAL Software Applications ControlSpace Designer 3.2 or later (Windows) Computer Interface Connection USB Type-B, RJ-45 (Ethernet, 100 Mbps) Notification Outputs (1) 3-pin Euroblock INDICATORS AND CONTROLS Controls, Front Panel (1) navigation soft key, (5) menu soft keys, (1) scroll/select knob (rotary/push) Controls, Rear Panel POWER SWITCH – ON/OFF AC power switch LED Status Indicators (1) input signal LED, (1) input clip LED, (1) output limit LED, (1) fault LED INTEGRATED DSP Delay 3 s Equalization Input: 5-band parametric EQ (±20 dB), notch, shelving, high-pass, low-pass / array (ArenaMatch, RoomMatch) / band-pass crossover / loudspeaker: 9-band parametric EQ (±20 dB), notch, shelving Crossover Types Butterworth, Bessel, or Linkwitz-Riley, up to 48 dB/octave A/D and D/A Converters 48 kHz / 24-bit Audio Latency < 0.95 ms, analog input to analog output DSP-Enabled Yes Limiters Peak voltage, RMS voltage Presets Bose Professional loudspeaker presets Processing Functions Input EQ, array EQ, loudspeaker EQ, peak voltage limiter, RMS voltage limiter, delay, band-pass, matrix mixer PHYSICAL Colors Black Cooling System Microprocessor-controlled, variable-speed fans, front to rear airflow Suspension/Mounting Rack-mounting Operating Temperature Range 0 °C to 40 °C (32 °F to 104 °F) Product Dimensions (H×W×D) 3.5 in × 19.0 in × 20.7 in (88 mm × 483 mm × 525 mm) Net Weight 28.4 lb (12.9 kg) Rack Spaces 2 Shipping Weight 34.5 lb (15.7 kg) Mechanical Diagrams front-view rear-view right-view Product codes 343546-1110 120V US 343546-4110 230V EU 343546-2110 230V AU 343546-5110 230V UK 343546-3110 100V JP Warranty Period 5 years Included in Packaging (2) 8-pin Euroblock connectors (4) shorting jumpers (9) cable ties (1) installation guide (9) 3-pin Euroblock connectors (1) IEC power cord (1) PowerMatch PM8500N  

Put the power where you need it. PowerShare amplifiers deliver outstanding audio performance and reliability with patented technologies inherited from the field-proven Bose Professional PowerMatch line — now with added flexibility. Using innovative PowerShare technology, the amp shares power across all output channels and delivers 400 watts for installed applications. This means you can distribute the total 400 watts asymmetrically across all outputs or use any individual output to deliver full power. And with support for both low- and high-impedance loads up to 100V, it’s easy to adapt PowerShare amplifiers to a wide range of applications. ControlSpace Designer software allows for Ethernet-based configuration and quick setup of external control options. With onboard Dante® audio networking, you have the flexibility to place PowerShare amplifiers away from source locations and closer to loudspeakers. This unique set of features and technologies makes PowerShare one of the most versatile, high-performance amplifiers available today.FEATURESPowerShare technology: Distribute the total 400 watts asymmetrically across all outputs using patented PowerShare technology, which allows each output to deliver full power. Instead of selecting amplifier power based on the needs of the largest zone, you now have the freedom to use total amplifier power in any application. This enables more flexibility during the initial design, or later on-site when making unplanned changes that take advantage of surplus power.Load-independent outputs: Configure any channel for low-impedance (4-8 Ω) or high-impedance (70/100V) applications without bridging or using jumpers.Integrated Dante audio networking: Support four audio input channels from a Dante network and mix onboard analog inputs with digital Dante inputs as selected in ControlSpace Designer software.Dual Feedback Loop system: Improve performance and reliability. The Dual Feedback Loop system, inherited from the field-proven Bose Professional PowerMatch amplifier line, allows for continuous monitoring and control of both the current and voltage delivered to each output load. This combination provides improved linearity and lower distortion while protecting loudspeakers.ControlSpace networking: Configure using ControlSpace Designer software for inclusion into larger networked audio systems where end-user controllers and scheduling events can control amplifier parameters.Integrated loudspeaker processing: Adjust various parameters using ControlSpace Designer software: nine-band PEQs, matrix mixing, crossover, limiters, delay, mute/output polarity, and more.Auto-standby: Save power — PowerShare amplifiers can be configured to automatically enter standby mode when the audio signal falls below a set threshold, then wake when audio returns.ApplicationsDesigned for a wide range of applications, including:Performing arts venuesPlaces of worshipConference centersRetail storesRestaurants and barsHospitality venuesSPECSTechnical SpecificationAMPLIFICATIONChannel Separation (Crosstalk)> 85 dB at 1 kHz, > 65 dB at 20 kHzDynamic Range100 dB at rated power, A-weightedGain, High-Impedance35 dB, 70V mode / 38 dB, 100V modeGain, Low-Impedance30.2 dBMaximum Peak Power, Symmetrical200 WMaximum Peak Power, Asymmetrical800 WRated Power, Asymmetrical400 WSNR100 dB (at rated power, A-weighted)Frequency Response20 Hz – 20 kHz (±0.5 dB) at 1 WNumber of Channels4Rated Power, Symmetrical100 WTHD+N< 0.04% at 1 kHz, 4–8 Ω, 70V/100VAUDIO INPUTS, ANALOGInput Channels4 balanced, lineConnectors(1) 12-pin EuroblockInput Impedance20 kΩMaximum Input Level20 dBu at 12 dBu sensitivitySensitivity4 dBu low, 12 dBu highAUDIO INPUTS/OUTPUTS, DIGITALChannels4 Dante inConnectors(2) RJ-45 Dante in/thruType12-pin EuroblockAUDIO OUTPUTS, ANALOGChannels4Connectors(1) 8-pin inverted EuroblockCOMPLIANCEEMCThis product meets all EN55103-2 immunity requirements for E2 electromagnetic environment.ELECTRICALCurrent Draw, Idle0.1 A at 120 VAC, 60 Hz / 0.06 A at 230 VAC, 50 HzCurrent Draw, Inrush8.0 A at 120 VAC, 60 Hz / 14.1 A at 230 VAC, 50 HzMains ConnectorIEC C14 inletMains Voltage100–240 VAC (±10%), 50/60 HzProtectionsHigh temperature, output short circuit, extra high frequency, excessively low/high AC line voltageAC Power Consumption14 W standby, 500 W maximumGENERALSoftware ApplicationsControlSpace Designer 5.4 or later (Windows)Computer Interface ConnectionRJ-45 (Ethernet, 100 Mbps)INDICATORS AND CONTROLSControls, Front Panel(1) power buttonControls, Rear PanelOutput attenuators, mute contactLED Status Indicators(1) power/status LED, (4) input signal LEDs, (4) output limit LEDsINTEGRATED DSPDelay50 ms, Outputs 3–4 onlyEqualizationInput EQ: 9-band parametric EQ (±18 dB), notch, shelving, high-pass, low-pass / band-pass crossover / loudspeaker EQ: 9-band parametric EQ (±18 dB), notch, shelvingCrossover TypesButterworth, Bessel, or Linkwitz-Riley, up to 48 dB/octaveA/D and D/A Converters48 kHz / 24-bitAudio Latency< 1 ms, analog input to analog outputDSP-EnabledYesLimitersPeak voltage, RMS voltagePresetsBose Professional loudspeaker presetsProcessing FunctionsInput EQ, loudspeaker EQ, peak voltage limiter, RMS voltage limiter, delay, band-pass, matrix mixer, mute/output polarity inversionPHYSICALColorsBlackCooling SystemMicroprocessor controlled, variable speed fans, left to right air flowSuspension/MountingRack-mountingProduct Dimensions (H×W×D)1.7 in × 19.0 in × 16.3 in (44 mm × 483 mm × 414 mm)Net Weight14.1 lb (6.4 kg)Rack Spaces1Shipping Weight17.2 lb (7.8 kg)Mechanical Diagramsfront-viewleft-viewrear-viewbottom-viewtop-viewright-viewProduct codes813375-1310120 V, US813375-2310230 V, EU813375-5310230 V, AU813375-4310230 V, UK813375-3310100 V, JPWarranty Period5 yearsIncluded in Packaging(1) 2-pin Euroblock connector(1) 8-pin Euroblock connector(1) 12-pin Euroblock connector(1) PowerShare PS404D(1) installation guide(1) IEC power cord

Put the power where you need it. PowerShare amplifiers deliver outstanding audio performance and reliability with patented technologies inherited from the field-proven Bose Professional PowerMatch line — now with added flexibility. Using innovative PowerShare technology, the amp shares power across all output channels and delivers 600 watts for installed applications. This means you can distribute the total 600 watts asymmetrically across all outputs or use any individual output to deliver full power. And with support for both low- and high-impedance loads up to 100V, it’s easy to adapt PowerShare amplifiers to a wide range of applications. ControlSpace Designer software allows for Ethernet-based configuration and quick setup of external control options. With onboard Dante® audio networking, you have the flexibility to place PowerShare amplifiers away from source locations and closer to loudspeakers. This unique set of features and technologies makes PowerShare one of the most versatile, high-performance amplifiers available today.FEATURESPowerShare technology: Distribute the total 600 watts asymmetrically across all outputs using patented PowerShare technology, which allows each output to deliver full power. Instead of selecting amplifier power based on the needs of the largest zone, you now have the freedom to use total amplifier power in any application. This enables more flexibility during the initial design, or later on-site when making unplanned changes that take advantage of surplus power.Load-independent outputs: Configure any channel for low-impedance (4-8 Ω) or high-impedance (70/100V) applications without bridging or using jumpers.Integrated Dante audio networking: Support four audio input channels from a Dante network and mix onboard analog inputs with digital Dante inputs as selected in ControlSpace Designer software.Dual Feedback Loop system: Improve performance and reliability. The Dual Feedback Loop system, inherited from the field-proven Bose Professional PowerMatch amplifier line, allows for continuous monitoring and control of both the current and voltage delivered to each output load. This combination provides improved linearity and lower distortion while protecting loudspeakers.ControlSpace networking: Configure using ControlSpace Designer software for inclusion into larger networked audio systems where end-user controllers and scheduling events can control amplifier parameters.Integrated Loudspeaker Processing: Adjust various parameters using ControlSpace Designer software: nine-band PEQs, matrix mixing, crossover, limiters, delay, mute/output polarity, and more.Auto-standby: Save power — PowerShare amplifiers can be configured to automatically enter standby mode when the audio signal falls below a set threshold, then wake when audio returns.ApplicationsDesigned for a wide range of applications, including:Performing arts venuesPlaces of worshipConference centersRetail storesRestaurants and barsHospitality venuesSPECSTechnical SpecificationAMPLIFICATIONChannel Separation (Crosstalk)> 85 dB at 1 kHz, > 65 dB at 20 kHzDynamic Range100 dB at rated power, A-weightedGain, High-Impedance35 dB, 70V mode / 38 dB, 100V modeGain, Low-Impedance32 dBMaximum Peak Power, Symmetrical300 WMaximum Peak Power, Asymmetrical1200 WRated Power, Asymmetrical600 WSNR100 dB (at rated power, A-weighted)Frequency Response20 Hz – 20 kHz (±0.5 dB) at 1 WNumber of Channels4Rated Power, Symmetrical150 WTHD+N< 0.04% at 1 kHz, 4–8 Ω, 70V/100VAUDIO INPUTS, ANALOGInput Channels4 balanced, lineConnectors(1) 12-pin EuroblockInput Impedance20 kΩMaximum Input Level20 dBu at 12 dBu sensitivitySensitivity4 dBu low, 12 dBu highAUDIO INPUTS/OUTPUTS, DIGITALChannels4 Dante inConnectors(2) RJ-45 Dante in/thruType12-pin EuroblockAUDIO OUTPUTS, ANALOGChannels4Connectors(1) 8-pin inverted EuroblockCOMPLIANCEEMCThis product meets all EN55103-2 immunity requirements for E2 electromagnetic environment.ELECTRICALCurrent Draw, Idle0.1 A at 120 VAC, 60 Hz / 0.06 A at 230 VAC, 50 HzCurrent Draw, Inrush8.0 A at 120 VAC, 60 Hz / 14.1 A at 230 VAC, 50 HzMains ConnectorIEC C14 inletMains Voltage100–240 VAC (±10%), 50/60 HzProtectionsHigh temperature, output short circuit, extra high frequency, excessively low/high AC line voltageAC Power Consumption14 W standby, 700 W maximumGENERALSoftware ApplicationsControlSpace Designer 5.4 or later (Windows)Computer Interface ConnectionRJ-45 (Ethernet, 100 Mbps)INDICATORS AND CONTROLSControls, Front Panel(1) power buttonControls, Rear PanelOutput attenuators, mute contactLED Status Indicators(1) power/status LED, (4) input signal LEDs, (4) output limit LEDsINTEGRATED DSPDelay50 ms, Outputs 3–4 onlyEqualizationInput EQ: 9-band parametric EQ (±18 dB), notch, shelving, high-pass, low-pass / band-pass crossover / loudspeaker EQ: 9-band parametric EQ (±18 dB), notch, shelvingCrossover TypesButterworth, Bessel, or Linkwitz-Riley, up to 48 dB/octaveA/D and D/A Converters48 kHz / 24-bitAudio Latency< 1 ms, analog input to analog outputDSP-EnabledYesLimitersPeak voltage, RMS voltagePresetsBose Professional loudspeaker presetsProcessing FunctionsInput EQ, loudspeaker EQ, peak voltage limiter, RMS voltage limiter, delay, band-pass, matrix mixer, mute/output polarity inversionPHYSICALColorsBlackCooling SystemMicroprocessor controlled, variable speed fans, left to right air flowSuspension/MountingRack-mountingProduct Dimensions (H×W×D)1.7 in × 19.0 in × 16.3 in (44 mm × 483 mm × 414 mm)Net Weight14.1 lb (6.4 kg)Rack Spaces1Shipping Weight17.2 lb (7.8 kg)Mechanical Diagramsfront-viewleft-viewrear-viewbottom-viewtop-viewright-viewProduct codes813403-1310120 V, US813403-2310230 V, EU813403-5310230 V, AU813403-4310230 V, UK813403-3310100 V, JPWarranty Period5 yearsIncluded in Packaging(1) 2-pin Euroblock connector(1) 8-pin Euroblock connector(1) 12-pin Euroblock connector(1) installation guide(1) PowerShare PS604D(1) IEC power cord

PowerShareX PSX1204D is a four-channel, 1200-watt smart amplifier designed for use with Bose Professional installed sound systems. Onboard DSP gives you instant access to optimized loudspeaker presets via ControlSpace Designer software with easy ecosystem integration across Bose Professional processors, loudspeakers, and controllers. Design, configuration, installation, and operation become simpler — so you can get the job done and move on to the next.FEATURESPower-sharing technology: Dynamically allocates power evenly or asymmetrically across outputs without having to bridge channels or lose channel count when powering Bose Professional loudspeakers.Bose Professional certified presets and ControlSpace Designer integration: Delivers the best performance, loudspeaker protection, and visibility of the entire Bose Professional system from a single UI for easy design, configuration, control, and monitoring.Proven Powersoft reliability: Ensures the systems operate every day, mitigating non-billable service calls.Flexible outputs: Capable of handling either low-impedance (2, 4, 8Ω) or high-impedance (70, 100V) loudspeaker loads.Built-in Dante audio: Supports up to 4 digital input channels from a Dante network eliminating the requirement of ordering and installing an accessory network card.4 analog inputs: Provide line-level source connections.PowerShare Design Tool: A downloadable design tool that allows system designers the ability to choose their PowerShare amp and simulate the power-sharing capability that, in some cases, can lead to a lower-power model requirement and cost savings.GPIO connections: Provide a remote level, on/off, and alarm triggers.Network monitoring: Provides real-time system performance data, minimizing downtime, guesswork, and unnecessary service calls.Rack-friendly 1RU design: That is only 358 mm (14.1 in) deep eliminating the need for oversized racks.ApplicationsDesigned for a wide range of applications, including:Commercial installationsHouses of worshipPerforming artsCorporateHotelsRetail/RestaurantsEducationGovernmentSports & FitnessSPECSTechnical SpecificationAMPLIFICATIONChannel Separation (Crosstalk)-70 dB typical at 1 kHzGain, Low-Impedance26 dB, 29 dB, 32 dB, 35 dB, selectableMaximum Peak Power, Symmetrical800 W at 2 Ω / 600 W at 4 Ω, 8 Ω, 70V, 100VMaximum Peak Power, Asymmetrical2200 W at 2 Ω, 4 Ω, 8 Ω, 70V, 100VRated Power, Asymmetrical1100 W at 2 Ω / 1100 W at 4 Ω in 70V mode / 1100 W at 8 Ω in 100V mode / 1100 W at 70V, 100VSNR> 104 dB (A-weighted)Frequency Response20 Hz – 20 kHz (±1.0 dB), 1 W at 8 ΩNumber of Channels4Power ClassClass DRated Power, Symmetrical400 W per channel at 2 Ω / 300 W per channel at 4 Ω, 8 Ω, 70V, 100VTHD+N< 0.1% (< 0.05% typical, from 0.1 W to half-power)AUDIO INPUTS, ANALOGInput Channels4 balanced, lineConnectors(1) 6-pin EuroblockInput Impedance20 kΩMaximum Input Level20 dBuSensitivity2.48 Vrms at 26 dB gain, 1.76 Vrms at 29 dB gain, 1.24 Vrms at 32 dB gain, 0.88 Vrms at 35 dB gainAUDIO INPUTS/OUTPUTS, DIGITALChannels4 Dante inConnectors(1) RJ-45 Dante inType6-pin EuroblockAUDIO OUTPUTS, ANALOGChannels4Connectors(1) 8-pin Euroblock, 7.62 mmCOMPLIANCEEMCThis product meets all EN55103-2 immunity requirements for E2 electromagnetic environment.ELECTRICALCurrent Draw, Idle0.45 A at 115 VAC, 60 Hz / 0.25 A at 230 VAC, 50 HzMains ConnectorIEC C20 inletMains Voltage100–240 VAC (±10%), 50/60 HzProtectionsHigh temperature, DC, output short circuit, high frequency, excessively low/high AC mains voltage, inrush current, clip, peak, long-term/RMSAC Power Consumption31.1 W idle, 251 W maximum at 1/8 power at 4 ΩGENERALSoftware ApplicationsControlSpace Designer 5.12 or later (Windows)Computer Interface ConnectionRJ-45 (Ethernet)Notification Outputs(1) 12-pin Euroblock (3 pins per channel), general purposeINDICATORS AND CONTROLSControls, Front Panel(1) power button, (1) soft reset button, (1) hard reset button, (1) check button, (4) channel attenuation controlsControls, Rear Panel16 output DIP switches (4 per channel), 8 system configuration DIP switchesLED Status Indicators(21) channel meter LEDs, (7) system status LEDs, (2) power status LEDsINTEGRATED DSPDelay2 s (input) + 100 ms (output) for time alignmentInternal Precision32-bit floating-pointEqualizationInput: 8-band parametric EQ (±15 dB), notch, shelving, high-pass, low-pass / array EQ (ArenaMatch) / band-pass crossover / loudspeaker: 9-band parametric EQ (±15 dB), notch, shelvingCrossover TypesButterworth, Bessel, or Linkwitz-Riley, up to 48 dB/octaveA/D and D/A Converters48 kHz / 24-bitAudio Latency2.5 ms, fixed-latency architectureDSP-EnabledYesLimitersPeak voltage, RMS voltage, clipPresetsBose Professional loudspeaker presetsProcessing FunctionsInput EQ, array EQ, loudspeaker EQ, peak voltage limiter, RMS voltage limiter, delay, band-pass, matrix mixerPHYSICALColorsBlackCooling SystemContinuous temperature-controlled variable-speed fan, front-to-back airflowSuspension/MountingRack-mountingProduct Dimensions (H×W×D)19.0 in × 1.8 in × 14.1 in (483 mm × 45 mm × 358 mm)Net Weight15.4 lb (7.0 kg)Rack Spaces1Shipping Weight22.8 lb (10.3 kg)Mechanical Diagramsfront-viewrear-viewtop-view

PowerShareX PSX2404D is a four-channel, 2400-watt smart amplifier designed for use with Bose Professional installed sound systems. Onboard DSP gives you instant access to optimized loudspeaker presets via ControlSpace Designer software with easy ecosystem integration across Bose Professional processors, loudspeakers, and controllers. Design, configuration, installation, and operation become simpler — so you can get the job done and move on to the next.FEATURESPower-sharing technology: Dynamically allocates power evenly or asymmetrically across outputs without having to bridge channels or lose channel count when powering Bose Professional loudspeakers.Bose Professional certified presets and ControlSpace Designer integration: Delivers the best performance, loudspeaker protection, and visibility of the entire Bose Professional system from a single UI for easy design, configuration, control, and monitoring.Proven Powersoft reliability: Ensures the systems operate every day, mitigating non-billable service calls.Flexible outputs: Capable of handling either low-impedance (2, 4, 8Ω) or high-impedance (70, 100V) loudspeaker loads.Built-in Dante audio: Supports up to 4 digital input channels from a Dante network eliminating the requirement of ordering and installing an accessory network card.4 analog inputs: Provide line-level source connections.PowerShare Design Tool: A downloadable design tool that allows system designers the ability to choose their PowerShare amp and simulate the power-sharing capability that, in some cases, can lead to a lower-power model requirement and cost savings.GPIO connections: Provide a remote level, on/off, and alarm triggers.Network monitoring: Provides real-time system performance data, minimizing downtime, guesswork, and unnecessary service calls.Rack-friendly 1RU design: That is only 358 mm (14.1 in) deep eliminating the need for oversized racks.ApplicationsDesigned for a wide range of applications, including:Commercial installationsHouses of worshipPerforming artsCorporateHotelsRetail/RestaurantsEducationGovernmentSports & FitnessSPECSTechnical SpecificationAMPLIFICATIONChannel Separation (Crosstalk)-70 dB typical at 1 kHzGain, Low-Impedance26 dB, 29 dB, 32 dB, 35 dB, selectableMaximum Peak Power, Symmetrical1600 W at 2 Ω / 1200 W at 4 Ω, 8 Ω, 70V, 100VMaximum Peak Power, Asymmetrical3200 W at 2 Ω / 3400 W at 4 Ω / 2600 W at 8 Ω / 3400 W at 70V / 3000 W at 100VRated Power, Asymmetrical1600 W at 2 Ω / 1700 W at 4 Ω / 1300 W at 8 Ω in 100V mode / 1700 W at 70V / 1500 W at 100VSNR> 104 dB (A-weighted)Frequency Response20 Hz – 20 kHz (±1.0 dB), 1 W at 8 ΩNumber of Channels4Power ClassClass DRated Power, Symmetrical800 W per channel at 2 Ω / 600 W per channel at 4 Ω, 8 Ω, 70V, 100VTHD+N< 0.1% (< 0.05% typical, from 0.1 W to half-power)AUDIO INPUTS, ANALOGInput Channels4 balanced, lineConnectors(1) 6-pin EuroblockInput Impedance20 kΩMaximum Input Level20 dBuSensitivity3.54 Vrms at 26 dB gain, 2.51 Vrms at 29 dB gain, 1.78 Vrms at 32 dB gain, 1.26 Vrms at 35 dB gainAUDIO INPUTS/OUTPUTS, DIGITALChannels4 Dante inConnectors(1) RJ-45 Dante inType6-pin EuroblockAUDIO OUTPUTS, ANALOGChannels4Connectors(1) 8-pin Euroblock, 7.62 mmCOMPLIANCEEMCThis product meets all EN55103-2 immunity requirements for E2 electromagnetic environment.ELECTRICALCurrent Draw, Idle0.45 A at 115 VAC, 60 Hz / 0.25 A at 230 VAC, 50 HzMains ConnectorIEC C20 inletMains Voltage100–240 VAC (±10%), 50/60 HzProtectionsHigh temperature, DC, output short circuit, high frequency, excessively low/high AC mains voltage, inrush current, clip, peak, long-term/RMSAC Power Consumption31.1 W idle, 405 W maximum at 1/8 power at 4 ΩGENERALSoftware ApplicationsControlSpace Designer 5.12 or later (Windows)Computer Interface ConnectionRJ-45 (Ethernet)Notification Outputs(1) 12-pin Euroblock (3 pins per channel), general purposeINDICATORS AND CONTROLSControls, Front Panel(1) power button, (1) soft reset button, (1) hard reset button, (1) check button, (4) channel attenuation controlsControls, Rear Panel16 output DIP switches (4 per channel), 8 system configuration DIP switchesLED Status Indicators(21) channel meter LEDs, (7) system status LEDs, (2) power status LEDsINTEGRATED DSPDelay2 s (input) + 100 ms (output) for time alignmentInternal Precision32-bit floating-pointEqualizationInput: 8-band parametric EQ (±15 dB), notch, shelving, high-pass, low-pass / array EQ (ArenaMatch) / band-pass crossover / loudspeaker: 9-band parametric EQ (±15 dB), notch, shelvingCrossover TypesButterworth, Bessel, or Linkwitz-Riley, up to 48 dB/octaveA/D and D/A Converters48 kHz / 24-bitAudio Latency2.5 ms, fixed-latency architectureDSP-EnabledYesLimitersPeak voltage, RMS voltage, clipPresetsBose Professional loudspeaker presetsProcessing FunctionsInput EQ, array EQ, loudspeaker EQ, peak voltage limiter, RMS voltage limiter, delay, band-pass, matrix mixerPHYSICALColorsBlackCooling SystemContinuous temperature-controlled variable-speed fan, front-to-back airflowSuspension/MountingRack-mountingProduct Dimensions (H×W×D)19.0 in × 1.8 in × 14.1 in (483 mm × 45 mm × 358 mm)Net Weight15.4 lb (7.0 kg)Rack Spaces1Shipping Weight22.8 lb (10.3 kg)Mechanical Diagramsfront-viewrear-viewtop-view

PowerShareX PSX4804D is a four-channel, 4800-watt smart amplifier designed for use with Bose Professional installed sound systems. Onboard DSP gives you instant access to optimized loudspeaker presets via ControlSpace Designer software with easy ecosystem integration across Bose Professional processors, loudspeakers, and controllers. Design, configuration, installation, and operation become simpler — so you can get the job done and move on to the next.FEATURESPower-sharing technology: Dynamically allocates power evenly or asymmetrically across outputs without having to bridge channels or lose channel count when powering Bose Professional loudspeakers.Bose Professional certified presets and ControlSpace Designer integration: Delivers the best performance, loudspeaker protection, and visibility of the entire Bose Professional system from a single UI for easy design, configuration, control, and monitoring.Proven Powersoft reliability: Ensures the systems operate every day, mitigating non-billable service calls.Flexible outputs: Capable of handling either low-impedance (2, 4, 8Ω) or high-impedance (70, 100V) loudspeaker loads.Built-in Dante audio: Supports up to 4 digital input channels from a Dante network eliminating the requirement of ordering and installing an accessory network card.4 analog inputs: Provide line-level source connections.PowerShare Design Tool: A downloadable design tool that allows system designers the ability to choose their PowerShare amp and simulate the power-sharing capability that, in some cases, can lead to a lower-power model requirement and cost savings.GPIO connections: Provide a remote level, on/off, and alarm triggers.Network monitoring: Provides real-time system performance data, minimizing downtime, guesswork, and unnecessary service calls.Rack-friendly 1RU design: That is only 358 mm (14.1 in) deep eliminating the need for oversized racks.ApplicationsDesigned for a wide range of applications, including:Commercial installationsHouses of worshipPerforming artsCorporateHotelsRetail/RestaurantsEducationGovernmentSports & FitnessSPECSTechnical SpecificationAMPLIFICATIONChannel Separation (Crosstalk)-70 dB typical at 1 kHzGain, Low-Impedance26 dB, 29 dB, 32 dB, 35 dB, selectableMaximum Peak Power, Symmetrical3000 W at 2 Ω, 4 Ω / 2400 W at 8 Ω, 70V, 100VMaximum Peak Power, Asymmetrical3600 W at 2 Ω / 5200 W at 4 Ω / 2600 W at 8 Ω / 4200 W at 70V / 4400 W at 100VRated Power, Asymmetrical1800 W at 2 Ω / 2600 W at 4 Ω / 1300 W at 8 Ω / 2100 W at 70V / 2200 W at 100VSNR> 104 dB (A-weighted)Frequency Response20 Hz – 20 kHz (±1.0 dB), 1 W at 8 ΩNumber of Channels4Power ClassClass DRated Power, Symmetrical1500 W per channel at 2 Ω / 1200 W per channel at 4 Ω, 8 Ω, 70V, 100VTHD+N< 0.1% (< 0.05% typical, from 0.1 W to half-power)AUDIO INPUTS, ANALOGInput Channels4 balanced, lineConnectors(1) 6-pin EuroblockInput Impedance20 kΩMaximum Input Level20 dBuSensitivity4.91 Vrms at 26 dB gain, 3.48 Vrms at 29 dB gain, 2.46 Vrms at 32 dB gain, 1.74 Vrms at 35 dB gainAUDIO INPUTS/OUTPUTS, DIGITALChannels4 Dante inConnectors(1) RJ-45 Dante inType6-pin EuroblockAUDIO OUTPUTS, ANALOGChannels4Connectors(1) 8-pin Euroblock, 7.62 mmCOMPLIANCEEMCThis product meets all EN55103-2 immunity requirements for E2 electromagnetic environment.ELECTRICALCurrent Draw, Idle0.45 A at 115 VAC, 60 Hz / 0.25 A at 230 VAC, 50 HzMains ConnectorIEC C20 inletMains Voltage100–240 VAC (±10%), 50/60 HzProtectionsHigh temperature, DC, output short circuit, high frequency, excessively low/high AC mains voltage, inrush current, clip, peak, long-term/RMSAC Power Consumption31.1 W idle, 840 W maximum at 1/8 power at 4 ΩGENERALSoftware ApplicationsControlSpace Designer 5.12 or later (Windows)Computer Interface ConnectionRJ-45 (Ethernet)Notification Outputs(1) 12-pin Euroblock (3 pins per channel), general purposeINDICATORS AND CONTROLSControls, Front Panel(1) power button, (1) soft reset button, (1) hard reset button, (1) check button, (4) channel attenuation controlsControls, Rear Panel16 output DIP switches (4 per channel), 8 system configuration DIP switchesLED Status Indicators(21) channel meter LEDs, (7) system status LEDs, (2) power status LEDsINTEGRATED DSPDelay2 s (input) + 100 ms (output) for time alignmentInternal Precision32-bit floating-pointEqualizationInput: 8-band parametric EQ (±15 dB), notch, shelving, high-pass, low-pass / array EQ (ArenaMatch) / band-pass crossover / loudspeaker: 9-band parametric EQ (±15 dB), notch, shelvingCrossover TypesButterworth, Bessel, or Linkwitz-Riley, up to 48 dB/octaveA/D and D/A Converters48 kHz / 24-bitAudio Latency2.5 ms, fixed-latency architectureDSP-EnabledYesLimitersPeak voltage, RMS voltage, clipPresetsBose Professional loudspeaker presetsProcessing FunctionsInput EQ, array EQ, loudspeaker EQ, peak voltage limiter, RMS voltage limiter, delay, band-pass, matrix mixerPHYSICALColorsBlackCooling SystemContinuous temperature-controlled variable-speed fan, front-to-back airflowSuspension/MountingRack-mountingProduct Dimensions (H×W×D)19.0 in × 1.8 in × 14.1 in (483 mm × 45 mm × 358 mm)Net Weight15.4 lb (7.0 kg)Rack Spaces1Shipping Weight22.8 lb (10.3 kg)Mechanical Diagramsfront-viewrear-viewtop-view

Ideal for zone-expansion applications, Bose Professional PowerSpace amplifiers enhance any premium commercial sound installation with clean, reliable power — and digital connectivity. A Bose Professional AmpLink input allows for multiple channels of uncompressed, low-latency digital audio from Bose Professional DSPs via a single Cat 5 cable. The PowerSpace P21000A provides 1000 watts per channel and features versatile outputs that give you the flexibility to deliver full channel power to either low- or high-impedance loads — without bridging — and even send double power to a single zone. For premium commercial applications, PowerSpace amplifiers provide the power and performance to get the job done — pure and simple. FEATURES 1000 watts per channel and works seamlessly with loudspeakers, DSPs, and controls to create complete commercial sound systems AmpLink input for simplified multichannel digital audio connection to compatible DSPs, reducing terminations and related points of failure Load-independent outputs deliver full channel power to either low-impedance loads (4-8 Ω) or high-impedance (70/100V) loads without bridging I-Share outputs deliver 2x power level by combining the current of two channels Auto-standby mode saves power when audio signal falls below a set threshold, then wakes when audio returns Applications Designed for a wide range of applications, including: Retail stores Restaurants and bars Hospitality venues Conference centers Schools Auxiliary zones SPECS Technical Specification AMPLIFICATION Channel Separation (Crosstalk) > 80 dB at 1 kHz, > 65 dB at 20 kHz Dynamic Range ≥ 100 dB at rated power, A-weighted Gain, High-Impedance 35 dB, 70V mode / 38 dB, 100V mode Gain, Low-Impedance 38 dB Maximum Peak Power, Symmetrical 2000 W Frequency Response 20 Hz – 20 kHz (±1 dB) at 1 W, 4–8 Ω / 20 Hz – 20 kHz (±1 dB) at 1 W with 50 Hz high-pass filter, 70/100V Number of Channels 2 Power Class Class D Rated Power, Symmetrical 1000 W THD+N < 0.04% at 1 kHz, 4–8 Ω, 70V/100V AUDIO INPUTS, ANALOG Input Channels 2 balanced Connectors (1) 6-pin Euroblock Input Impedance 10 kΩ Maximum Input Level 22 dBu at 14 dBu sensitivity Sensitivity -10 dBV, 4 dBu, 14 dBu AUDIO INPUTS/OUTPUTS, DIGITAL Channels 8 AmpLink in, 8 AmpLink thru Connectors (1) RJ-45 AmpLink in / (1) RJ-45 AmpLink thru Type 6-pin Euroblock AUDIO OUTPUTS, ANALOG Channels 2 Connectors (1) 4-terminal block COMPLIANCE EMC This product meets all EN55103-2 immunity requirements for E2 electromagnetic environment. ELECTRICAL Mains Connector IEC 60320-C14 inlet Mains Voltage 100–240 VAC (±10%), 50/60 Hz AC Power Consumption 25 W auto-standby, 570 W maximum INDICATORS AND CONTROLS Controls, Front Panel (1) power button Controls, Rear Panel Mute, output attenuators, DIP switches for amplifier configuration, input selector, update port, gain/sensitivity LED Status Indicators (1) power/status LED, (4) input signal LEDs, (4) output limit LEDs INTEGRATED DSP DSP-Enabled No PHYSICAL Colors Gray Cooling System Microprocessor-controlled variable-speed fans, front-to-back air flow Suspension/Mounting Rack-mounting Operating Temperature Range 0 °C to 40 °C (32 °F to 104 °F) Product Dimensions (H×W×D) 1.7 in × 19.0 in × 16.5 in (44 mm × 483 mm × 420 mm) Net Weight 14.6 lb (6.6 kg) Rack Spaces 1 Shipping Weight 19.0 lb (8.6 kg)  

Ideal for zone-expansion applications, Bose Professional PowerSpace amplifiers enhance any premium commercial sound installation with clean, reliable power — and digital connectivity. A Bose Professional AmpLink input allows for multiple channels of uncompressed, low-latency digital audio from Bose Professional DSPs via a single Cat 5 cable. The PowerSpace P2600A provides 600 watts per channel and features versatile outputs that give you the flexibility to deliver full channel power to either low- or high-impedance loads — without bridging — and even send double power to a single zone. For premium commercial applications, PowerSpace amplifiers provide the power and performance to get the job done — pure and simple. FEATURES 600 watts per channel and works seamlessly with loudspeakers, DSPs, and controls to create complete commercial sound systems AmpLink input for simplified multichannel digital audio connection to compatible DSPs, reducing terminations and related points of failure Load-independent outputs deliver full channel power to either low-impedance loads (4-8 Ω) or high-impedance (70/100V) loads without bridging I-Share outputs deliver 2x power level by combining the current of two channels Auto-standby mode saves power when audio signal falls below a set threshold, then wakes when audio returns Applications Designed for a wide range of applications, including: Retail stores Restaurants and bars Hospitality venues Conference centers Schools Auxiliary zones   SPECS Technical Specification AMPLIFICATION Channel Separation (Crosstalk) > 80 dB at 1 kHz, > 65 dB at 20 kHz Dynamic Range ≥ 100 dB at rated power, A-weighted Gain, High-Impedance 35 dB, 70V mode / 38 dB, 100V mode Gain, Low-Impedance 35 dB Maximum Peak Power, Symmetrical 1200 W Frequency Response 20 Hz – 20 kHz (±1 dB) at 1 W, 4–8 Ω / 20 Hz – 20 kHz (±1 dB) at 1 W with 50 Hz high-pass filter, 70/100V Number of Channels 2 Power Class Class D Rated Power, Symmetrical 600 W THD+N < 0.04% at 1 kHz, 4–8 Ω, 70V/100V AUDIO INPUTS, ANALOG Input Channels 2 balanced Connectors (1) 6-pin Euroblock Input Impedance 10 kΩ Maximum Input Level 22 dBu at 14 dBu sensitivity Sensitivity -10 dBV, 4 dBu, 14 dBu AUDIO INPUTS/OUTPUTS, DIGITAL Channels 8 AmpLink in, 8 AmpLink thru Connectors (1) RJ-45 AmpLink in / (1) RJ-45 AmpLink thru Type 6-pin Euroblock AUDIO OUTPUTS, ANALOG Channels 2 Connectors (1) 4-terminal block COMPLIANCE EMC This product meets all EN55103-2 immunity requirements for E2 electromagnetic environment. ELECTRICAL Mains Connector IEC 60320-C14 inlet Mains Voltage 100–240 VAC (±10%), 50/60 Hz AC Power Consumption 25 W auto-standby, 570 W maximum INDICATORS AND CONTROLS Controls, Front Panel (1) power button Controls, Rear Panel Mute, output attenuators, DIP switches for amplifier configuration, input selector, update port, gain/sensitivity LED Status Indicators (1) power/status LED, (4) input signal LEDs, (4) output limit LEDs INTEGRATED DSP DSP-Enabled No PHYSICAL Colors Gray Cooling System Microprocessor-controlled variable-speed fans, front-to-back air flow Suspension/Mounting Rack-mounting Operating Temperature Range 0 °C to 40 °C (32 °F to 104 °F) Product Dimensions (H×W×D) 1.7 in × 19.0 in × 16.5 in (44 mm × 483 mm × 420 mm) Net Weight 13.7 lb (6.2 kg) Rack Spaces 1 Shipping Weight 18.1 lb (8.2 kg) Product codes 803286-1110 120V US 803286-2110 230V EU 803286-5110 230V AU 803286-4110 230V UK 803286-3110 100V JP Warranty Period 5 years Included in Packaging (1) 2-pin Euroblock connector (1) Cat 5e cable, 3.3 ft (1 m) (2) 3-pin Euroblock connectors (1) I-Share jumper (5) terminal forks, 14–16 AWG (1) PowerSpace P2600A (1) installation guide (1) IEC power cord  

The Bose Professional PowerSpace P4300+ amplifier combines power and DSP into a 1RU, four-channel design for quick-turn installations. Part of a comprehensive platform of loudspeakers, controls, and software that help installers deliver premium commercial sound systems efficiently, Bose Professional PowerSpace+ amplifiers feature a quick-setup workflow. An onboard configuration utility and intuitive browser-based UI present common tasks in a logical manner, so you can configure the system faster, reducing installation time while increasing setup accuracy. Once installed, proprietary algorithms offer predictable performance while optional interfaces — such as ControlCenter analog zone controllers — make operation easy for end users. For premium commercial applications, Bose Professional PowerSpace+ models provide amplification and DSP in one integrated, easy-to-configure package.FEATURESTake advantage of full mixing functionality, allowing input sources to be mixed and assigned to each listening area.300 watts per channel and works seamlessly with Bose Professional loudspeakers and controls to create complete commercial sound systemsBuilt-in DSP, including SmartBass processing, routing, level control, delays, limiters, Bose Professional loudspeaker EQs, plus input and area EQsPowerSpace configuration utility facilitates setup with an integrated webserver and intuitive browser-based UI, including real-time control with signal and thermal monitoringOpti-Voice paging provides a smooth transition between music and announcementsIntegrated features to simplify commercial installations: Dedicated input for 600 Ω telephone or mic paging, independent 600 Ω music-on-hold and line-level aux outputs, and a NO/NC mute connectionLoad-independent outputs deliver full channel power to either low-impedance loads (4-8 Ω) or high-impedance (70/100V) loads without bridgingI-Share outputs deliver 2x power level by combining the current of two channelsAuto-standby mode saves power when audio signal falls below a set threshold, then wakes when audio returnsIntuitive end-user operation — optional ControlCenter CC-1, CC-2, and CC-3 analog zone controllers provide easy volume control and source selectionApplicationsDesigned for a wide range of applications, including:Retail storesRestaurants and barsHospitality venuesConference centersSchoolsAuxiliary zonesSPECSTechnical SpecificationAMPLIFICATIONChannel Separation (Crosstalk)> 80 dB at 1 kHz, > 65 dB at 20 kHzDynamic Range≥ 100 dB at rated power, A-weightedGain, High-Impedance35 dB, 70V mode / 38 dB, 100V modeGain, Low-Impedance32 dBMaximum Peak Power, Symmetrical600 WFrequency Response20 Hz – 20 kHz (±1 dB) at 1 W, 4–8 Ω / 20 Hz – 20 kHz (±1 dB) at 1 W with 50 Hz high-pass filter, 70/100VNumber of Channels4Power ClassClass DRated Power, Symmetrical300 WTHD+N< 0.04% at 1 kHz, 4–8 Ω, 70V/100VAUDIO INPUTS, ANALOGInput Channels4 balanced, 2 unbalancedConnectors(3) 3-pin Euroblock, (1) 4-pin Euroblock, (2) RCA stereo pairsInput Impedance10 kΩMaximum Input Level22 dBu at 14 dBu sensitivitySensitivity-10 dBV, 4 dBu, 14 dBuAUDIO OUTPUTS, ANALOGChannels6 (4 loudspeaker + 2 auxiliary)Connectors(1) 8-terminal block, (1) 3-pin Euroblock, lineCOMPLIANCEEMCThis product meets all EN55103-2 immunity requirements for E2 electromagnetic environment.ELECTRICALMains ConnectorIEC C14 inletMains Voltage100–240 VAC (±10%), 50/60 HzAC Power Consumption25 W auto-standby, 570 W maximumGENERALSystem RequirementsGoogle Chrome 64.0.3282.140 or later / Mozilla Firefox Quantum 58.0.2 or later / Microsoft Internet Explorer 11.2007.14393.0 or later / Microsoft Edge 38.14393.1066.0 or laterSoftware ApplicationsPowerSpace+ Configuration Utility (web browser)Computer Interface ConnectionRJ-45 (Ethernet)INDICATORS AND CONTROLSControls, Front Panel(1) power LED, (1) input signal LED, (1) output limit LEDControls, Rear PanelRJ-45 remote input for ControlCenter CC-1, CC-2 and CC-3 zone controllers, mute, output attenuatorsLED Status Indicators(1) power/status LED, (4) input signal LEDs, (4) output limit LEDsINTEGRATED DSPDelay2 sEqualizationInput: 3-band EQ, paging / Loudspeaker: 9-band PEQ (±20 dB), notch, shelving, high-pass, low-pass, low-frequency compensation / Area : 7-band PEQ (±20 dB), notch, shelving, high-pass, low-passCrossover TypesButterworth 6 (±6 dB/octave), Butterworth 12 (±12 dB/octave), Butterworth 18 (±18 dB/octave), Butterworth 24 (±24 dB/octave)A/D and D/A Converters48 kHz / 24-bitAudio Latency< 1 ms, analog input to analog loudspeaker outputDSP-EnabledYesLimitersPeak voltage, RMS voltagePresetsBose Professional loudspeaker presetsProcessing FunctionsInput EQ, loudspeaker EQ, peak voltage limiter, RMS voltage limiter, ControlCenter configuration, matrix mixer, mute/output polarity inversionPHYSICALColorsGrayCooling SystemMicroprocessor-controlled variable-speed fans, front-to-back air flowSuspension/MountingRack-mountingOperating Temperature Range0 °C to 40 °C (32 °F to 104 °F)Product Dimensions (H×W×D)1.7 in × 19.0 in × 16.5 in (44 mm × 483 mm × 420 mm)Net Weight14.6 lb (6.6 kg)Rack Spaces1Shipping Weight19.0 lb (8.6 kg)Product codes803289-1110120V US803289-2110230V EU803289-5110230V AU803289-4110230V UK803289-3110100V JPWarranty Period5 yearsIncluded in Packaging(1) 2-pin Euroblock connector(1) 4-pin Euroblock connector(2) I-Share jumpers(10) terminal forks, 14–16 AWG(5) 3-pin Euroblock connectors(1) PowerSpace P4300+(1) installation guide(1) IEC power cord

Ideal for zone-expansion applications, Bose Professional PowerSpace amplifiers enhance any premium commercial sound installation with clean, reliable power — and digital connectivity. A Bose Professional AmpLink input allows for multiple channels of uncompressed, low-latency digital audio from Bose Professional DSPs via a single Cat 5 cable. The PowerSpace P4300A provides 300 watts per channel and features versatile outputs that give you the flexibility to deliver full channel power to either low- or high-impedance loads — without bridging — and even send double power to a single zone. For premium commercial applications, PowerSpace amplifiers provide the power and performance to get the job done — pure and simple.   FEATURES 300 watts per channel and works seamlessly with loudspeakers, DSPs, and controls to create complete commercial sound systems   AmpLink input for simplified multichannel digital audio connection to compatible DSPs, reducing terminations and related points of failure   Load-independent outputs deliver full channel power to either low-impedance loads (4-8 Ω) or high-impedance (70/100V) loads without bridging   I-Share outputs deliver 2x power level by combining the current of two channels   Auto-standby mode saves power when audio signal falls below a set threshold, then wakes when audio returns   Applications Designed for a wide range of applications, including: Retail stores Restaurants and bars Hospitality venues Conference centers Schools Auxiliary zones SPECS Technical Specification AMPLIFICATION Channel Separation (Crosstalk) > 80 dB at 1 kHz, > 65 dB at 20 kHz Dynamic Range ≥ 100 dB at rated power, A-weighted Gain, High-Impedance 35 dB, 70V mode / 38 dB, 100V mode Gain, Low-Impedance 32 dB Maximum Peak Power, Symmetrical 600 W Frequency Response 20 Hz – 20 kHz (±1 dB) at 1 W, 4–8 Ω / 20 Hz – 20 kHz (±1 dB) at 1 W with 50 Hz high-pass filter, 70/100V Number of Channels 4 Power Class Class D Rated Power, Symmetrical 300 W THD+N < 0.04% at 1 kHz, 4–8 Ω, 70V/100V AUDIO INPUTS, ANALOG Input Channels 4 balanced Connectors (2) 6-pin Euroblock Input Impedance 10 kΩ Maximum Input Level 22 dBu at 14 dBu sensitivity Sensitivity -10 dBV, 4 dBu, 14 dBu AUDIO INPUTS/OUTPUTS, DIGITAL Channels 8 AmpLink in, 8 AmpLink thru Connectors (1) RJ-45 AmpLink in / (1) RJ-45 AmpLink thru Type 2 × 6-pin Euroblock AUDIO OUTPUTS, ANALOG Channels 4 Connectors (1) 8-terminal block COMPLIANCE EMC This product meets all EN55103-2 immunity requirements for E2 electromagnetic environment. ELECTRICAL Mains Connector IEC 60320-C14 inlet Mains Voltage 100–240 VAC (±10%), 50/60 Hz AC Power Consumption 25 W auto-standby, 570 W maximum INDICATORS AND CONTROLS Controls, Front Panel (1) power button Controls, Rear Panel Mute, output attenuators, DIP switches for amplifier configuration, input selector, update port, gain/sensitivity LED Status Indicators (1) power/status LED, (4) input signal LEDs, (4) output limit LEDs INTEGRATED DSP DSP-Enabled No PHYSICAL Colors Gray Cooling System Microprocessor-controlled variable-speed fans, front-to-back air flow Suspension/Mounting Rack-mounting Operating Temperature Range 0 °C to 40 °C (32 °F to 104 °F) Product Dimensions (H×W×D) 1.7 in × 19.0 in × 16.5 in (44 mm × 483 mm × 420 mm) Net Weight 14.6 lb (6.6 kg) Rack Spaces 1 Shipping Weight 19.0 lb (8.6 kg) VIDEOs     Product codes 803288-1110 120V US 803288-2110 230V EU 803288-5110 230V AU 803288-4110 230V UK 803288-3110 100V JP Warranty Period 5 years Included in Packaging (1) 2-pin Euroblock connector (2) I-Share jumpers (10) terminal forks, 14–16 AWG (1) Cat 5e cable, 3.3 ft (1 m) (4) 3-pin Euroblock connectors (1) PowerSpace P4300A (1) installation guide (1) IEC power cord  

The award-winning Veritas series from Bose Professional delivers superior background/foreground music, paging and multimedia for commercial applications. Bluetooth® 5.0 wireless input and user-intuitive OLED screen with quick-start QR code simplify setup—whether you’re a pro installer or a DIYer. With four models to choose from, Veritas amplifiers offer the perfect combination of power, performance and flexibility.Compact and powerful, the 1100BH is suited for smaller distributed audio systems, background music, and paging applications. Designed for 70V/100V high-impedance systems, it efficiently powers multiple wall or ceiling loudspeakers to deliver broad coverage. Perfect for smaller venues, offices, and retail spaces, the 1100BH features a smaller half-rack size and front XLR/¼-inch input for convenient mic or audio source connection.FEATURESPremium amplification with advanced DSP for optimized performanceBluetooth connectivity and RCA connectivity—no wire splicing requiredIntuitive front-panel OLED screen for easy setup and controlIncluded bracket accessory for mount-anywhere flexibilityEmbedded quick-start QR code in the OLED screen simplifies installationSupports high-impedance (70/100V) applicationsRemote level control with Bose Professional or third-party wall controllersDynamic EQ adjusts bass levels to achieve a fuller sound even at low volumesUp to 30 selectable EQ presets ensure Bose Professional signature sound performance and long-term reliabilityOpti-Voice paging feature ensures clear speech intelligibilityConvection cooling for fanless operation in quiet installs such as offices and conference roomsApplicationsDesigned for a wide range of applications, including:Retail storesRestaurants and barsHospitality venuesConference centersSchoolsAuxiliary zonesSPECSTechnical SpecificationAMPLIFICATIONDynamic Range88 dBFrequency Response70 Hz – 18 kHz (+0/-4 dB, @ 1 W reference 1 kHz)Rated Power, Symmetrical1 x 100 W at 70V/100VTHD+N≤0.3 % (at full rated power)AUDIO INPUTS, ANALOGInput Channels(2) unbalanced line, (2) balanced mic/lineConnectors(2) RCA stereo pairs, (1) XLR/1/4-in, (1) 4-pin EuroblockInput Impedance20 kΩ (line), 2.4 kΩ (page)Input Range-10 dBV to +10 dBV (line), -60 dBV to +10 dBV (page)Maximum Input Level+10 dBV (line), +10 dBV (page)Nominal Input Level0 dBV (line), -40 dBV (page)Sensitivity-10 dBV (line), -58 dBV (page)AUDIO OUTPUTS, ANALOGChannels(2) loudspeaker, (1) unbalanced lineConnectors(1) 3-pin inverted Euroblock, (1) RCA stereo pairNominal Output Level1 × 100 W at 70V/100 V (loudspeaker), 0 dBV max (auxiliary)ELECTRICALMains ConnectorIEC C14 inletMains Voltage100–240 VAC (±10%), 50/60 HzProtectionsHigh temperature, output shortAC Power Consumption15 W idle, 200 W maximumINDICATORS AND CONTROLSControls, Front PanelPower on/off switch, input select switch (A/Bluetooth/B), input gain knob (XLR/1/4-in), rotary encoderControls, Rear PanelInput gain knobs (A, B, page), mute connector, ControlCenter portINTEGRATED DSPA/D and D/A Converters48 kHz / 24-bitAudio Latency10.4 ms (any input to speaker output or aux output)Presets70 Hz high-pass filter, 80 Hz high-pass filter, AMU105, AMU108, DesignMax (all models), EdgeMax (all models), FreeSpace FS (all models), subwooferProcessing FunctionsLoudspeaker EQ, Opti-Voice paging, Dynamic EQPHYSICALCooling SystemNatural convectionProduct Dimensions (H×W×D)44 mm × 214 mm × 310 mm (1.7 in × 8.4 in × 12.2 in)Net Weight3.2 kg (7.1 lb)

The award-winning Veritas series from Bose Professional delivers superior background/foreground music, paging and multimedia for commercial applications. Bluetooth® 5.0 wireless input and user-intuitive OLED screen with quick-start QR code simplify setup—whether you’re a pro installer or a DIYer. With four models to choose from, Veritas amplifiers offer the perfect combination of power, performance and flexibility.The ultimate choice for large-scale 70V/100V distributed audio systems, the 2160BH efficiently powers multiple zones with premium sound clarity and reliable, consistent coverage. Ideal for hotels, conference centers, and multi-room installations, the 2160BH offers high output with advanced features for integrators handling complex, high-demand applications.FEATURESPremium amplification with advanced DSP for optimized performanceBluetooth connectivity and RCA connectivity—no wire splicing requiredIntuitive front-panel OLED screen for easy setup and controlEmbedded quick-start QR code in the OLED screen simplifies installationSupports high-impedance (70/100V) applicationsMulti-zone flexibility—support for up to two independent zonesRemote level control with Bose Professional or third-party wall controllersDynamic EQ adjusts bass levels to achieve a fuller sound even at low volumesUp to 30 selectable EQ presets ensure Bose Professional signature sound performance and long-term reliabilityOpti-Voice paging feature ensures clear speech intelligibilityApplicationsDesigned for a wide range of applications, including:Retail storesRestaurants and barsHospitality venuesConference centersSchoolsAuxiliary zonesSPECSTechnical SpecificationAMPLIFICATIONChannel Separation (Crosstalk)≤ -58 dBu below rated power, 1 kHzDynamic Range88 dBFrequency Response20 Hz – 20 kHz (+0/-3 dB) at 1 W, 1 kHz referenceRated Power, Symmetrical2 x 160 W at 70/100VTHD+N≤ 0.5% at rated powerAUDIO INPUTS, ANALOGAdjustment Range0 dB to -30 dB (line), 0 dB to +50 dB (page)Input Channels(2) balanced line, (2) unbalanced line, (1) balanced mic/lineConnectors(2) RCA stereo pairs, (2) 5-pin Euroblock, (1) 4-pin EuroblockInput Impedance20 kΩ (line), 2 kΩ (page)Input Range-8 dBu to +22 dBu (line), -58 dBu to +12 dBu (page)Maximum Input Level22 dBu (line), 12 dBu (page)Nominal Input Level4 dBu (line), -38 dBu (page)Sensitivity-8 dBu (line), -58 dBV (page)AUDIO OUTPUTS, ANALOGChannels(2) loudspeaker, (1) unbalanced lineConnectors(2) 2-pin inverted Euroblock, (1) RCA stereo pairNominal Output Level2 × 160 W at 70V/100V (loudspeaker), 2 dBu (auxiliary)ELECTRICALMains ConnectorIEC C14 inletMains Voltage100–240 VAC (±10%), 50/60 HzProtectionsHigh temperature, output short circuit, excessively low/high AC line voltageAC Power Consumption13.6 W standby, 500 W maximumINDICATORS AND CONTROLSControls, Front PanelPower on/off switch, input select switch (A/Bluetooth/B), rotary encoderControls, Rear PanelAmplifier mode DIP switches, input gain knobs (A, B, page), page threshold knob, mute connector, ControlCenter portsINTEGRATED DSPA/D and D/A Converters48 kHz / 24-bitAudio Latency10.4 ms (any input to speaker output or aux output)Presets70 Hz high-pass filter, 80 Hz high-pass filter, AMU105, AMU108, DesignMax (all models), EdgeMax (all models), FreeSpace FS (all models), subwooferProcessing FunctionsLoudspeaker EQ, Opti-Voice paging, Dynamic EQPHYSICALCooling SystemFan system, left-to-right airflowProduct Dimensions (H×W×D)44 mm × 483 mm × 324 mm (1.7 in × 19.0 in × 12.8 in)Net Weight4.4 kg (9.7 lb)Shipping Weight5.8 kg (12.8 lb)

The award-winning Veritas series from Bose Professional delivers superior background/foreground music, paging and multimedia for commercial applications. Bluetooth® 5.0 wireless input and user-intuitive OLED screen with quick-start QR code simplify setup—whether you’re a pro installer or a DIYer. With four models to choose from, Veritas amplifiers offer the perfect combination of power, performance and flexibility.For applications requiring more power in a low-impedance 4/8-ohm system, the 2160BL delivers robust sound for larger rooms, restaurants, and performance spaces. It provides high output with advanced DSP tuning, perfect for integrators needing a high-performance amplifier for dynamic commercial audio without the complexity of a 70V/100V system.FEATURESPremium amplification with advanced DSP for optimized performanceBluetooth connectivity and RCA connectivity—no wire splicing requiredIntuitive front-panel OLED screen for easy setup and controlEmbedded quick-start QR code in the OLED screen simplifies installationSupports low-impedance (4–8Ω) applicationsRemote level control with Bose Professional or third-party wall controllersDynamic EQ adjusts bass levels to achieve a fuller sound even at low volumesUp to 30 selectable EQ presets ensure Bose Professional signature sound performance and long-term reliabilityOpti-Voice paging feature ensures clear speech intelligibilityApplicationsDesigned for a wide range of applications, including:Retail storesRestaurants and barsHospitality venuesConference centersSchoolsAuxiliary zonesSPECSTechnical SpecificationAMPLIFICATIONChannel Separation (Crosstalk)≤ -58 dBu below rated power, 1 kHzDynamic Range88 dBFrequency Response20 Hz – 20 kHz (+0/-3 dB) at 1 W, 1 kHz referenceRated Power, Symmetrical2 × 160 W at 4 Ω / 2 × 80 W at 8 ΩTHD+N≤ 0.5% at rated powerAUDIO INPUTS, ANALOGAdjustment Range-20 dB to +20 dB (line), 0 dB to +50 dB (page)Input Channels(2) balanced line, (2) unbalanced line, (1) balanced mic/lineConnectors(2) RCA stereo pairs, (2) 5-pin Euroblock, (1) 4-pin EuroblockInput Impedance20 kΩ (line), 2 kΩ (page)Input Range-8 dBu to +22 dBu (line), -58 dBu to +12 dBu (page)Maximum Input Level22 dBu (line), 12 dBu (page)Nominal Input Level4 dBu (line), -38 dBu (page)Sensitivity-8 dBu (line), -58 dBV (page)AUDIO OUTPUTS, ANALOGChannels(2) loudspeaker, (1) unbalanced lineConnectors(2) 2-pin inverted Euroblock, (1) RCA stereo pairNominal Output Level2 × 160 W at 4 Ω / 2 × 80 W at 8 Ω (loudspeaker), 2 dBu (auxiliary)ELECTRICALMains ConnectorIEC C14 inletMains Voltage100–240 VAC (±10%), 50/60 HzProtectionsHigh temperature, output short circuit, excessively low/high AC line voltageAC Power Consumption13.6 W standby, 500 W maximumINDICATORS AND CONTROLSControls, Front PanelPower on/off switch, input select switch (A/Bluetooth/B), rotary encoderControls, Rear PanelAmplifier mode DIP switches, input gain knobs (A, B, page), page threshold knob, mute connector, ControlCenter portsINTEGRATED DSPA/D and D/A Converters48 kHz / 24-bitAudio Latency10.4 ms (any input to speaker output or aux output)PresetsFlat, 80 Hz high-pass filter, AMU105, AMU108, DesignMax (all models), EdgeMax (all models), FreeSpace FS (all models), subwooferProcessing FunctionsLoudspeaker EQ, Opti-Voice paging, Dynamic EQPHYSICALCooling SystemFan system, left-to-right airflowProduct Dimensions (H×W×D)44 mm × 483 mm × 324 mm (1.7 in × 19.0 in × 12.8 in)Net Weight4.4 kg (9.7 lb)Shipping Weight5.8 kg (12.8 lb)

The award-winning Veritas series from Bose Professional delivers superior background/foreground music, paging and multimedia for commercial applications. Bluetooth® 5.0 wireless input and user-intuitive OLED screen with quick-start QR code simplify setup—whether you’re a pro installer or a DIYer. With four models to choose from, Veritas amplifiers offer the perfect combination of power, performance and flexibility.The 250BL is perfect choice for DIYers looking for professional-grade audio without the complexity. A flexible choice for low-impedance 4/8-ohm systems, the 250BL is ideal for smaller rooms, boutique shops, and localized sound installations. Weighing just 4.4 pounds, its compact half-rack design allows for easy, discreet mounting virtually anywhere.FEATURESPremium amplification with advanced DSP for optimized performanceBluetooth connectivity and RCA connectivity—no wire splicing requiredIntuitive front-panel OLED screen for easy setup and controlIncluded bracket accessory for mount-anywhere flexibilityEmbedded quick-start QR code in the OLED screen simplifies installationSupports low-impedance (4–8Ω) applicationsRemote level control with Bose Professional or third-party wall controllersDynamic EQ adjusts bass levels to achieve a fuller sound even at low volumesUp to 30 selectable EQ presets ensure Bose Professional signature sound performance and long-term reliabilityOpti-Voice paging feature ensures clear speech intelligibilityConvection cooling for fanless operation in quiet installs such as offices and conference roomsApplicationsDesigned for a wide range of applications, including:Retail storesRestaurants and barsHospitality venuesConference centersSchoolsAuxiliary zonesSPECSTechnical SpecificationAMPLIFICATIONChannel Separation (Crosstalk)≤ -60 dBV below rated power, 1 kHzDynamic Range88 dBFrequency Response40 Hz – 18 kHz (+0/-3 dB, @ 1 W reference 1 kHz)Rated Power, Symmetrical2 × 50 W at 4 Ω / 2 × 25 W @ 8 ΩTHD+N≤0.3 % (at full rated power)AUDIO INPUTS, ANALOGInput Channels(2) unbalanced line, (2) balanced mic/lineConnectors(2) RCA stereo pairs, (1) XLR/1/4-in, (1) 4-pin EuroblockInput Impedance20 kΩ (line), 2.4 kΩ (page)Input Range-10 dBV to +10 dBV (line), -60 dBV to +10 dBV (page)Maximum Input Level+10 dBV (line), +10 dBV (page)Nominal Input Level0 dBV (line), -40 dBV (page)Sensitivity-10 dBV (line), -58 dBV (page)AUDIO OUTPUTS, ANALOGChannels(2) loudspeaker, (1) unbalanced lineConnectors(2) 2-pin inverted Euroblock, (1) RCA stereo pairNominal Output Level2 × 50 W @ 4 Ω min; 2 × 25 W @ 8 Ω max (loudspeaker), 0 dBV max (auxiliary)Output Impedance4 Ω (loudspeaker), 400 Ω (auxiliary)ELECTRICALMains ConnectorIEC C14 inletMains Voltage100–240 VAC (±10%), 50/60 HzProtectionsHigh temperature, output shortAC Power Consumption15 W idle, 200 W maximumINDICATORS AND CONTROLSControls, Front PanelPower on/off switch, input select switch (A/Bluetooth/B), input gain knob (XLR/1/4-in), rotary encoderControls, Rear PanelInput gain knobs (A, B, page), mute connector, ControlCenter portINTEGRATED DSPA/D and D/A Converters48 kHz / 24-bitAudio Latency10.4 ms (any input to speaker output or aux output)PresetsFlat, 80 Hz high-pass filter, AMU105, AMU108, DesignMax (all models), EdgeMax (all models), FreeSpace FS (all models), subwooferProcessing FunctionsLoudspeaker EQ, Opti-Voice paging, Dynamic EQPHYSICALCooling SystemNatural convectionProduct Dimensions (H×W×D)44 mm × 214 mm × 310 mm (1.7 in × 8.4 in × 12.2 in)Net Weight2.0 kg (4.4 lb)Shipping Weight2.9 kg (6.4 lb)