MC4-I

The CGDMX-512BI is a serial to DMX512 interface which makes easy interfacing possible between a CRESTRON control system and lighting products using the DMX512 protocol.Only one serial RS-232/422 port on the Crestron control system is required to communicate with the DMX512 interface.The DMX Interface has two separate DMX Ports, one DMX Out to send data to the DMX lighting products and one DMX In to receive data from e.g. DMX512 lighting consoles or other DMX512 control units. The CGDMX-512BI can operate in different modes, to process the incoming DMX512 data with the Crestron data like HTP1, LTP2 and exclusive3 handling. The Crestron media processor is able to change these modes, too. Furthermore the Crestron media processor can set the HTP, LTP and exclusive handling for each channel separately.

4-Series™ Control System A rack-mountable control system with a powerful 4‑Series™ control engine and numerous integrated control ports.The CP4 is a secure, high‑performance control processor with a powerful 4-Series™ control engine. The CP4 is designed to integrate and automate technology within any modern networked home, commercial building, or government facility. 4-Series Control Engine 4-Series control systems come equipped with an upgraded multicore CPU, delivering a sizable speed and performance increase compared to all Crestron 3‑Series® control processors. The improved performance allows 4-Series control systems to handle the increasing demands of an advanced automated system. Crestron 4-Series delivers a dynamic and secure control system platform capable of managing a room full of disparate technologies. Reliable networking and IP control afford seamless integration with other systems and devices, with add-on control capability using Crestron touch screens, wireless remotes, and mobile device apps, as well as remote management through Crestron Fusion® software and the XiO Cloud® service.

The Crestron® HD-DA8-4KZ-E is a simple to use, high-performance 4K AV distribution amplifier designed to split a single HDMI® signal to feed up to eight separate displays, switchers, and/or other devices. It provides full support for UHD and DCI 4K60 4:4:4 and HDR video, HDCP 1.4 or 2.2 copy protection, and high-bitrate 7.1 audio, to ensure optimal performance and compatibility for any HD or 4K video application. No programming or control system is required for operation.[1]   For smaller applications, refer to models HD-DA2-4KZ-E and HD-DA4-4KZ-E.     Key Features Splits one HDMI® source to eight outputs Handles 4K60 4:4:4 and HDR video signals [1] Fully compatible with HD 1080p, UHD 4K, and DCI 4K sources and displays Handles 3D video and Deep Color Handles Dolby® TrueHD, Dolby Atmos®, DTS HD®, DTS:X®, and uncompressed 7.1 linear PCM audio Selectable handling of HDCP 2.2 or HDCP 1.4 EDID management options Input and output video presence indication No programming or control system required Thin profile – less than one inch deep Surface, shelf, or single rack rail mountable External 100-240V universal power pack included

The HD-MD4X1-4KZ-E is a 4K60 4:4:4 HDR (High Dynamic Range) AV switcher that provides a cost-effective solution for professional AV applications. Equipped with four HDMI® inputs and one HDMI output, the HD-MD4X1-4KZ-E includes features such as automatic switching of inputs, EDID management, HDCP 2.3 compliance, enterprise-grade security, and XiO Cloud® service support.   4K60 4:4:4 and HDR Support The HD-MD4X1-4KZ-E supports video resolutions up to 4K60 with 4:4:4 color sampling. HDR10, HDR10+, and Dolby Vision® video formats are also supported.   Automatic Switching of Inputs Automatic switching among the HDMI inputs can occur based on the last connected input or on the routing priority assigned to each input.   Switching behavior is configurable using the web interface or the XiO Cloud® service and is programmable using a Crestron control system. In addition, input selection push buttons on the front panel of the HD-MD4X1-4KZ-E enable the desired inputs to be selected manually.   EDID Management The HD-MD4X1-4KZ-E provides comprehensive management of EDID (Extended Display Identification Data) to ensure that every source is displayed at the optimal resolution and format. For applications requiring a custom configuration, the HD-MD4X1-4KZ-E enables assessment of the format and resolution capabilities of any device that is connected to the HDMI output of the switcher. The HD-MD4X1-4KZ-E provides the ability to configure signals appropriately for the most desirable and predictable behavior.   HDMI Audio De-embedding Embedded HDMI 2-channel LPCM audio can be extracted from the selected HDMI input and transmitted to the AUX stereo audio output. Volume and mute control are configurable for the HDMI output and AUX audio output.   Device Control via CEC Under the management of a control system, CEC (Consumer Electronics Control) over the HDMI connections can control the source and display devices, potentially eliminating the need for dedicated serial cables or IR emitters. CEC over the HDMI output can also enable the display device to be turned on or off automatically without the use of a control system.   Enterprise-Grade Security The HD-MD4X1-4KZ-E includes advanced security features and protocols. Using 802.1X authentication, Active Directory® credential management, PKI authentication, TLS, SSH, and HTTPS, the HD-MD4X1-4KZ-E provides a true enterprise-grade AV switcher.   Built-In Web Interface Configuration of the HD-MD4X1-4KZ-E can be accomplished by using the built-in web interface. The configuration of a single unit can be downloaded to a computer or mobile device and then uploaded to multiple HD-MD4X1-4KZ-E units to simplify system installation.   .AV Framework™ Technology Support In addition to a built-in web interface and control system programming, built-in .AV Framework technology of a Crestron control system can be used to configure and control the HD-MD4X1-4KZ-E. For information about .AV Framework technology and the supported Crestron control systems, visit www.crestron.com/avframework.   XiO Cloud® Service Support The HD-MD4X1-4KZ-E is compatible with the XiO Cloud service, which is an IoT (Internet of Things) platform for remotely provisioning, monitoring, and managing Crestron devices across an enterprise or an entire client base. Built on the Microsoft® Azure® software platform and using industry-leading Azure IoT Hub technology, the XiO Cloud service enables installers and IT managers to deploy and manage thousands of devices in the amount of time it previously took to manage a single device. Unlike other virtual machine-based cloud solutions, Azure services provide unlimited scalability to suit the ever-growing needs of an enterprise. For more information, visit www.crestron.com/xiocloud.   Compact Surface-Mountable Design The HD-MD4X1-4KZ-E can be mounted to a wall or other flat surface. It can also be attached to a single rack rail.     Key Features 4K60 4:4:4 digital AV switcher HDR10, HDR10+, and Dolby Vision® video formats Four HDMI® inputs and one HDMI output Automatic switching of inputs EDID management HDCP 2.3 compliance HDMI audio de-embedding Device control via CEC Enterprise-grade security Built-in web interface Compatibility with Crestron® 3-Series® or later control systems .AV Framework™ technology support XiO Cloud® service support Compact surface-mountable design PoE powered device (optional power pack sold separately)

The HD‑RXC‑4KZ‑101 is a DM® Essentials 4K60 4:4:4 receiver designed to interoperate with a DM® Essentials transmitter or DMPS Essentials switcher for the transmission of HDMI®, RS-232, and IR signals. A CAT5e or higher twisted pair cable (Crestron DM‑CBL‑8G or DM‑CBL‑ULTRA sold separately) is needed to connect the HD‑RXC‑4KZ‑101 to the DM Essentials transmitter or DMPS Essentials switcher. For 1080p, WUXGA, and 2K signals, a cable length of up to 230 ft (70 m) is supported. For UHD and 4K signals, a cable length of up to 130 ft (40 m) is supported.1   Interoperability with a DM Essentials Transmitter or DMPS Essentials Switcher The DM Essentials input port of the HD‑RXC‑4KZ‑101 must be connected to a DM Essentials output port of a DM Essentials transmitter or DMPS Essentials switcher. Examples of supported DM Essentials 4K60 4:4:4 transmitters are the HD‑TXC‑4KZ‑101 and HD‑TXCA‑4KZ‑101. Supported DMPS Essentials switchers are the HD‑PS622, HD‑PS621, HD‑PS402, and HD‑PS401.   The HD‑RXC‑4KZ‑101 can be configured and controlled only when it is used with a DMPS Essentials switcher. The web interface of the switcher can be used to configure the HD‑RXC‑4KZ‑101. In addition, control system programming and .AV Framework™ software support of the HD‑RXC‑4KZ‑101 is hosted by the switcher.   4K60 4:4:4 and HDR Support The HD‑RXC‑4KZ‑101 supports video resolutions up to 4K60 with 4:4:4 color sampling. HDR10, HDR10+, and Dolby Vision® video formats are also supported.2   Compact, Surface-Mountable Design Compact in design, the HD‑RXC‑4KZ‑101 can be mounted onto a flat surface such a wall behind a flat-panel display or a ceiling above a projector. It can also be attached to a single rack rail in the back of an equipment cabinet. The HD‑RXC‑4KZ‑101 can receive power from the included power pack or from the remote DM Essentials transmitter or DMPS Essentials switcher.3     Key Features Interoperability with a DM® Essentials transmitter or DMPS Essentials switcher Point-to-point extension of HDMI®, RS-232, and IR signals over a CAT5e or higher cable DM Essentials transmission distance up to 130 ft (40 m) for UHD and 4K signals or up to 230 ft (70 m) for 1080p, WUXGA, and 2K signals 4K60 4:4:4 capability HDR10, HDR10+, and Dolby Vision® video formats Compliance with HDCP 2.3 CEC (Consumer Electronics Control) pass-through capability Bidirectional RS-232 and IR pass-through capability EDID pass-through capability Compact, surface-mountable design Power from 24VDC power pack (included) or from remote DM Essentials transmitter or DMPS Essentials switcher

The HD-TX-201-C-2G-E (-B-T or -W-T) is a DM Lite® wall plate transmitter designed to pair with a DM Lite or DMPS Lite™ receiver to form a signal extender for HDMI® signals. The DM Lite family of products offers a versatile solution for extending HD, UHD, 2K, and 4K video signals, with stereo or surround sound audio, over a single CAT5e (or higher) cable. A cable length of up to 230 ft (70 m) is supported for HD 1080p, WUXGA, and 2K signals, or up to 130 ft (40 m) for UHD and 4K.1   In addition to its HDMI input, the HD-TX-201-C-2G-E also includes a VGA input accompanied by a stereo analog audio input. Auto-switching between HDMI and VGA enables plug-and-play simplicity. Manual input selection is also available using the front panel INPUT SEL button. The VGA input can accept RGB and component video signals by using an appropriate breakout cable or adapter (not included). The audio input is selected in tandem with the VGA input, and can be used by itself with no video source connected. However, it cannot be paired with the HDMI video input.   NOTE: When paired with an HD-RX-201-C-E or DMPS Lite receiver, the local inputs are switched in combination with the HDMI input on the receiver, and can also be controlled remotely through integration with a Crestron® control system.   A CAT6a RJ-45 courtesy jack is included to provide a 1000BASE-T network connection for computers and other devices. The front panel jack passes through to a parallel jack on the rear, which connects to an available port on the customer’s LAN. This LAN jack is provided as a convenience to replace the need for a separate RJ-45 wall jack. It does not interface with the DM Lite system and cannot be used to extend Ethernet signals or interface with a control system.   The HD-TX-201-C-2G-E series is available in black or white, and is designed to mount into a 2-gang electrical box or plaster ring (not included). When paired with a surface-mountable receiver, the HD-TX-201-C-2G-E is powered by the receiver over the DM Lite link cable.2   Note: This product is not addressable from a control system and offers no programmable functionality except when paired with an HD-RX-201-C-E or DMPS Lite receiver. Otherwise, AV and CEC signals are simply passed through between the transmitter and receiver. The RJ-45 link port on this product is exclusively intended for linking with a single DM Lite or DMPS Lite receiver. It should not be used to connect to any other equipment or network. DM Lite technology is not compatible with PoE, PoDM, DigitalMedia 8G+®, or HDBaseT® technology.     Key Features Pairs with a DM Lite® or DMPS Lite™ receiver Enables extension of HDMI® video and audio signals Converts and extends VGA and analog audio signals Auto-switches between one HDMI input and one VGA input Links to the receiver via a single CAT5e (or higher) twisted pair cable Supports 4K and UHD at up to 130 ft (40 m) Supports HD 1080p, WUXGA, and 2K at up to 230 ft (70 m) Handles 4K video resolutions up to 4K60 4:2:0 and 4K30 4:4:4 Handles 3D video and Deep Color Supports Dolby® TrueHD, Dolby Atmos®, DTS HD®, DTS:X®, and uncompressed 7.1 linear PCM audio Compatible with HDMI, DVI, and Dual-Mode DisplayPort™ sources Compatible with VGA, RGBHV, RGBS, RGsB, and YPbPr component sources up to HD 1080p and WUXGA HDCP 1.4 compliant Passes CEC and EDID signals Allows control system integration when paired with an HD-RX-201-C-E or DMPS Lite receiver Courtesy LAN jack Flush wall mount design Installs in a 2-gang U.S. electrical box (2-1/4” deep) or plaster ring (not included) Decorator style faceplates sold separately (type FP-G2-DM only) Normally powered by the receiver (surface-mountable) over the link cable