CLWI-1SW2EX-W
€399.84
Available, delivery time: 1-3 days
Product information "CLWI-1SW2EX-W"
The CLWI-1SW2EX delivers native Crestron® control to up to two individual lights or other switched loads, in new or retrofit 230 Volt applications. Featuring reliable infiNET EX® wireless technology, the CLWI-1SW2EX can be installed in virtually any location thanks to reliable mesh networking. Dual-load control on the CLWI-1SW2EX is perfect for controlling a bathroom light and exhaust fan in a single gang.
Field-Replaceable and Engravable Buttons
The CLWI-1SW2EX features engravable buttons that can be swapped out in the field. Change of room décor or functionality is easy to handle long after the dimmer or switch has been installed. Positive snap-on fittings require no tools. Configure the dimmer or switch with a large rocker, or any combination of up to two adjacent half-size rockers or triple button pad. Each CLWI-1SW2EX ships with a full assortment of blank buttons as well.
Integrated Keypad
Because the CLWI-1SW2EX is attached to the Crestron network, it can also function as a keypad, sending commands to trigger whole-room lighting scenes or distributed audio functions. Supporting up to six buttons, the in-wall dimmer or switch serves as a great user control interface in any Crestron system. Its single-box form factor maximizes control capability in a small space while increasing the opportunity for Crestron control in every room. Also available are aesthetically matched standalone keypads which use Cresnet® or infiNET EX® communications.
infiNET EX
Ultra-reliable infiNET EX wireless technology provides steadfast two-way RF communications throughout a residential or commercial structure without the need for physical control wiring. Employing a 2.4 GHz mesh network topology, each infiNET EX device functions as an expander, passing command signals through to every other infiNET EX device within range (approximately 150 feet or 46 meters indoors), ensuring that every command reaches its intended destination without disruption.[1]
The CLWI-1SW2EX communicates with a Crestron control system via an infiNET EX Wireless Gateway (model CEN-GWEXER, DIN-AP3MEX, or MC3[2]). Up to 100 infiNET EX devices may coexist on a single wireless network, and every non-battery-powered device that is added to the network effectively increases the range and stability of the entire network by providing multiple redundant signal paths[1]. Built-in Dynamic Frequency Allocation continuously monitors RF conditions, automatically selecting the clearest channel to prevent interference from neighboring networks, cordless phones, and microwaves.
Streamlined Installation
In addition to field replaceable buttons, the CLWI-1SW2EX features screw-clamp connectors for simplified wiring while reducing installation time and material costs. So slim, the CLWI-1SW2EX can be installed in square gang boxes making them the perfect choice for both new and retrofit projects.
Key Features
- Control two individual loads from a single gang
- Field-replaceable and engravable buttons
- Available in anthracite or white finishes
- infiNET EX® robust communication
- Configurable up to six buttons
- Screw-clamp connectors for easy installation
- Stylish bargraph LED array provides real-time status feedback
Login
Crestron Zubehör
Crestron® decorator-style faceplates (FP-G series) come in a wide variety of colors and finishes to perfectly match any Crestron Cameo® keypad or lighting control, as well as other Crestron and third-party devices. They are offered in four sizes from single-gang to 4-gang. The two-piece design achieves a clean and elegant appearance with no visible screws.
One Gang Plastic Box - screws/nails This One Gang Boxed is a back box that will fit a corresponding gang unit. It is made out of strong plastic and is perfectly suited to be used in stone walls. It can be used as a back box for all one gang USA mountable products like keypads, transmitters, etc... Dimensions DxHxW: 72x94x57 mm
Wall Mount Power Pack, 24 VDC, 0.75 A, 2.1 mm, Universal An outlet-mounted power pack for select Crestron products. Supports US and International voltages. The Crestron® PW-2407WU is a universal regulated power pack. It is designed to plug directly into an electrical outlet, and includes a universal blade kit to accommodate most outlet types.
The Crestron® PW-2407WUL is a universal regulated power pack. It is designed to plug directly into an electrical outlet, and includes a universal blade kit to accommodate most outlet types.
The Crestron® PW-2412WU is a universal regulated power pack. It is designed to plug directly into an electrical outlet, and includes a universal blade kit to accommodate most outlet types.
The PWE-4803RU is an 802.3af compliant Power over Ethernet (PoE) power source designed to support PoE powered devices. Standards-based Power over Ethernet affords a one-wire solution for connecting Ethernet devices, delivering power and data over a single CAT5/6 network cable. Using the PWE-4803RU, there is no need to install a separate power supply at the device location. The PWE-4803RU can simply be mounted at any convenient location up to 100 meters (328 feet) from the device.
The TSW-770-MSMK multisurface mount kit provides a versatile surface mounting solution for a TSW‑770 or TSS‑770 series touch screen. Using the multisurface mount kit, the touch screen can be mounted directly to glass, granite, marble, wood paneling, plaster, smooth masonry, or virtually any other flat surface. TSW-770-MSMK is ideal for mounting at the entrance to a meeting space for room scheduling applications, and it is compatible with the TSW‑770‑LB light bar to provide a clear indication of the room availability status. The TSW-770-MSMK attaches securely to a flat, smooth surface without screws using the included peel‑and‑stick adhesive rear housing. For a finished appearance when mounted to a transparent glass wall, an adhesive molded plastic cap is provided, which simply affixes to the opposite side of the glass behind the unit. Templates are provided for the MSMK and the plastic cap to help ensure that both are level and properly aligned with the surface. The TSW-770-MSMK comes complete with a self‑adhering plastic raceway for use on smooth surfaces, which conceals cables running to the touch screen from the floor, ceiling, or an adjacent wall, pillar, or mullion. The raceway is paintable and is composed of three 3 ft (0.91 m) sections, as well as an assortment of elbows and couplings. The TSW-770-MSMK rear housing provides four cutout holes (on the top, bottom, and sides of the housing) for running concealed cables to the touch screen using the included adhesive‑backed raceway. A plastic cover with an opening for the raceway is attached to the rear housing to conceal any unused cutouts. Key Features Permits flush mounting a TSW‑770 or TSS‑770 series touch screen to virtually any flat, smooth surface Ideal for mounting at the entrance to a meeting space for room scheduling applications Supports glass surface and partition mounting Compatible with the TSW‑770‑LB light bar for a clear indication of the room availability status Secure, screwless installation using the peel‑and‑stick adhesive rear housing Provides an assortment of raceway to conceal wiring Includes a rotatable plastic cover to conceal unused cutouts Available in smooth black or white finish
The Crestron® TSW‑UMB‑70 universal mounting bracket provides a simple in‑wall mounting solution for TSW‑570, TSW‑770, TSW‑1070, TSS‑770, and TSS‑1070 series touch screens. The TSW‑UMB‑70 is also compatible with TSW‑570P series touch screens when mounted in portrait orientation. NOTE: TSW‑570 and TSW‑570P series touch screens ship with one TSW‑UMB‑70 included. By itself, the TSW‑UMB‑70 is a postconstruction solution that allows the touch screen to be retrofitted into existing drywall or paneling. The bracket is also suitable for use in a lectern or podium. Because the TSW‑UMB‑70 fits all supported touch screen models, a touch screen can be replaced easily without needing to cut or patch the wall. For preconstruction wall mounting applications, the TSW‑UMB‑70 can be used along with the TSW‑UMB‑70‑PMK or TSW‑UMB‑570P‑PMK mounting kits. For masonry and concrete installations, the TSW‑UMB‑70 can be used along with the TSW‑UMB‑70‑BBI wall mount back box.1
This Two Gang Box is a back box that will fit a corresponding gang unit. It is made out of strong plastic and is perfectly suited to be used in stone walls. It can be used as a back box for two-gang mountable keypads, transmitters, etc... Dinmensions DxHxW: 77x94x101 mm
